Will Erickson Over-The-Cab Truck Bed Ladder Rack EM07707 Fit 2017 Toyota Tacoma w/Deck Rail System

Question

Question:

I have a 2017 Toyota Tacoma double cab, long bed, and with the deck rail system. Will I be able to easily install this product onto this truck? If not, what would be the best alternative to this rack?

asked by: Kevin

0

Expert Reply:

Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 does not have the provisions to install on the 2017 Toyota Tacoma while the deck rail system is still in place. But you can use Thule T-Rac Pro 2 ladder rack # TH37005XT-EX which also has a cantilever extension and fits the deck rail system.

expert reply by: Michael H

0

Answer 1

There are only two ladder racks for your 2018 Toyota Tacoma with the factory deck rail system that are black in color which are the Thule Xsporter Pro Ladder Rack part #TH500XTB-THXK4B and the Thule TracRac TracONE Ladder Rack part #TH27000XTB-XK4B.…

view full answer...

Answer 2

Hey Brett, the best option we have would be the Yakima Overhaul HD part #Y01151-5768 which is an adjustable height ladder rack that attaches to the utility track you have above the storage containers in the bed of your 2022 Toyota Tacoma Trail…

view full answer...

Answer 3

Thanks for reaching out! It looks like there is a bit of a gap between the forwardmost crossbar and the Cantilever Extension #TH24001XT when it's installed. Thule states that the forwardmost bar isn't needed and the load can be secured by the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Sean, yes you can use the TowSmart Adjustable Ball Mount #TS89VR in the Gen-Y Voyager Ball Mount #GY52JJ. This will provide cushioning to the adjustable ball mount plus some additional drop. What are you planning on towing with this setup?

view full answer...

Answer 7

Hey Michael, sure can! For a 5' Leer topper, I am thinking the 55" long x 49" wide LockNLoad platform will be the best bet and will fit comfortably on the topper. Here is a list of all the parts you will need for that: - Yakima 54"…

view full answer...

Answer 8

Yes, Jeff, your 2024 Tacoma TRD is a great match, as is any vehicle with a 7 way connector on the back. You’ll just want to use the Redarc #RED57AR and you won't need anything else. It connects in front of the 7 way outlet on your vehicle, then…

view full answer...

Answer 9

Hey Todd! Yes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters #Y01151-5755 is compatible with the Synetic MR Retractable PRO Tonneau Cover on your 2025 Toyota Tacoma. The adapters will fit the T-slot rails on that…

view full answer...

Answer 10

I looked up your Dexter axle info and you have a 3,500 lb Torflex axle which the part #K71-707-01 would be the correct lift kit for. This will give you a lift of 2-5/8 inches.

view full answer...

Answer 11

To carry lumber and tools with your 2023 Toyota Tacoma you are going to want the Thule TracRac TracONE Truck Bed Ladder Rack item #TH27000XTB-XK4B. This fits both the 5 foot beds and 6 foot beds with the deck rail system. The Thule ladder rack system…

view full answer...

Will Erickson Over-The-Cab Truck Bed Ladder Rack EM07707 Fit 2017 Toyota Tacoma w/Deck Rail System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching