Availability of Replacment Parts and Repair Kits for a Roadmaster Falcon 2 Tow Bar

Updated 02/22/2011 | Published 02/21/2011

Products Featured in This Question

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(415)

$850.00

Replacement Autowlok Button and Glue Kit for Roadmaster BlackHawk, StowMaster, and Falcon Tow Bars

(22)

$12.55

Roadmaster Autowlok Repair Kit for Falcon Tow Bar Model 5250

(44)

$20.51

Roadmaster Autowlok Locking Pin Repair Kit for Falcon 2 and BlackHawk Tow Bars

(42)

$25.13

Replacement Pin w/ Linchpin and Cable for Roadmaster Tow Bar to Demco Base Plate Adapter

(9)

$26.74

Replacement 3/4" Diameter Pin with Linchpin and Cable for Roadmaster Tow Bars - Qty 1

(104)

$25.65

Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars - Qty 2

(261)

$43.24

Question:

I have owned a Falcon II for 8 years. Im concerned of the condition of the pin where the tow bar swivels. Ive not tried to disassemble it for inspection. How do I know what is its condition. Ive used it every year towing a 2003 Dodge Dakota 4X4. It has performed very well so far. Its a 5000 # towbar. Please advise

asked by: Gary H

Expert Reply:

If there is any doubt at all, I would replace any worn parts. With a tow bar that has seen as much action as your Falcon II, # RM-520, it would be a good idea to give it some replacement parts so it will continue to serve you well.

In the realm of Falcon series tow bar replacement parts, we have the RoadMaster Autowlok Repair Kit for Falcon Tow Bars, # RM-910003-50. I have included a link to the installation details for reference. We also have the RoadMaster Replacement Button and Glue Kit, # RM-910003-00, if needed. We also carry the Roadmaster Locking Pin Repair Kit, # RM-910003-80.

We also have replacement pins. You would need RoadMaster 3/4 Inch Diameter Pin with Linchpin and Chain, # RM-910008-00 or # RM-910007 for 1/2 inch pins. We also have the base pins, # RM-910029. Basically, if you can see any stress fractures, or any of the hardware is even slightly bent or chipped, it is time to replace it.