Trailer Brake Assemblies that Fit Older Axles that are 12 inch in Diameter and Attach with 5 Bolts

Question

Question:

Where are these made? I would like to use MADE IN USA parts, if I can. Thank you Item # AKEBRK-7-SA

asked by: Timothy S

1

Helpful Expert Reply:

Based on the dimensions you listed the etrailer.com brake assembly kit part # AKEBRK-7-SA would be your best option. It is 12 inch by 2 inch and has the 5 bolt mounting pattern.

I attached a picture that shows the dimensions of the bolt pattern for you to check out as well.

expert reply by: Jameson C

1

click to enlarge

Tim S.

4/25/2017

Where are these made? I would like to use MADE IN USA parts, if I can. Thank you Item # AKEBRK-7-SA

Jameson C.

4/26/2017

I do have an USA made solution for you but the kit I mentioned are not made here. Instead you would want the Dexter assemblies # 23-464 for the left hand side and then # 23-465 for the right hand side.

Answer 1

You're correct. A 6 on 5-1/2 inch bolt pattern will have 6 lugs with a 5-1/2 inch bolt circle. That means that if you measure from the center of one bolt across the hub to center of the opposite bolt, that distance will be 5-1/2 inches. I'll…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Hey Clarence. There's no way to look at a tire or wheel and tell if it's a 5 on 4-1/2 or a 5 on 5 but you can take a real quick measurement to figure it out. If you'll look at the picture below you'll see a wheel with a red line on…

view full answer...

Answer 8

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Answer 11

Hi Kyler! We definitely have center caps and lug nuts that you can use, but the Kenda Karrier KR35 ST175/80R13 LRD Radial Trailer Tire w/ 13" Aluminum AM03 Wheel - 5 on 4-1/2 #KE34TJ does not include them. With that said, I recommend the…

view full answer...

Answer 12

Hello Jason, thanks for reaching out. Yes, the Kenda Karrier KR53 ST205/75R15 tire with 15" black aluminum wheel #KE58JV does come balanced from the factory. Trailer tire and wheel assemblies are balanced by matching the tire’s high and low…

view full answer...

Trailer Brake Assemblies that Fit Older Axles that are 12 inch in Diameter and Attach with 5 Bolts

Products Featured in This Question

Continue Researching