How to Use Curt Trailer Hitch Support Strap on Toyota Prius V with Rear Spoiler

Question

Question:

I have a Curt 1 1/4 hitch to carry a Saris 2 bike platform rack. I have a Curt Bike Rack Support strap, #18050 to use with the hitch and rack. My question: I have a Toyota Prius V. It has a spoiler on top of the rear window. If I hook the strap on top of the window, it must pass over that spoiler. Im concerned about rubbing or too much weight on the spoiler. Could I hook the strap on the bottom of the rear hatch? It seems that it would accomplish the same thing, i.e. steadying the bike rack.

asked by: Joe F

0

Expert Reply:

To use the Curt Trailer Hitch Support Strap # 18050 on your Toyota Prius that has a rear spoiler, I recommend simply running the strap to the lower edge of the hatch door. As you referenced in your question, this will still provide the required support for your bike rack and trailer hitch. You will then just lower the attachment point of the strap on the bike rack to the upright mast.

I have also attached a video demonstration of this strap for you to check out.

expert reply by: Chris R

0

Answer 1

Hey Kris! A Class I hitch like the Curt #C67RJ is the only option for your Prius. There are no Class II options available, and no way to really modify this to make it one. It is possible to gain clearance with the use of an adapter like the #e93YR…

view full answer...

Answer 2

Aside from the warranty, there's a practical reason for using a Curt Stability Strap, part #18050 or any stability strap. Stability straps reduce the amount of jolting, jostling and all around movement that occurs on non-trailer loads when they…

view full answer...

Answer 3

Hey Matt, I know it's tempting to try and use a shortcut for the power wire of the Curt harness part #C56353 but the reason you have to run it to the vehicle battery is because that's what provides the circuit protection that prevents shorts…

view full answer...

Answer 4

Hi Joe, Thule has transitioned on most of their bike racks to clamping to the inside of the receiver tube and then using a retention pin (pictured below) that will slip into the hitch pin hole as extra security in the event that the clamp does…

view full answer...

Answer 5

Absolutely, Val, and I understand where you're coming from. Luckily, the Thule Outpace 2 bike rack #TH39SA was made with apartment dwellers and city riders in mind. It’s just under 30 lbs and folds up into a compact suitcase-style shape, so it’s…

view full answer...

Answer 6

I reached out to Curt and they don't have any information on the amp draw from the Curt Auxiliary LED Indicator Lights #C53201. Since they are LED it will be incredibly low so overdrawing the circuit won't really be a concern. It would be…

view full answer...

Answer 7

We do indeed have a product that will allow you to show your license plate while also using the Thule OutWay Trunk Bike Rack #TH45JV: - Thule License Plate Holder for Bike Racks #TH35JV This is really simple as all you do is strap the holder directly…

view full answer...

Answer 8

Yes, we can help you choose a compatible 2- or 3-bike trunk-mount bike carrier for your 2016 Toyota Prius. All confirmed fits in 2- and 3-bike trunk racks for your 2016 Prius are shown on the linked page. Even if you need to transport only 2 bikes…

view full answer...

Answer 9

The Curt Hitch Receiver, part #C11473 is a confirmed fit for the 2017 Prius Prime. Curt hitches require that you use Curt Trailer Hitch Support Strap, part #18050 with every load to avoid voiding your warranty. When using the stabilizing strap, I…

view full answer...

Answer 10

The Curt Trailer Hitch Support Strap part #18050 is required to be used with all Curt Class I hitch receivers for all non-towing purposes. As you are using the hitch to secure a bike rack, you will need to use this strap to further support the load…

view full answer...

Answer 11

The AutoAttach pin on the Thule EasyFold XT Bike Rack #TH903202 is essentially just a guide for ensuring that the shank of the rack is far enough into the hitch receiver that the rack is secured. Once the AutoAttach system is lined up with the hitch…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

How to Use Curt Trailer Hitch Support Strap on Toyota Prius V with Rear Spoiler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching