Hangers to Use with Leaf Spring e54SR
Updated 03/14/2017 | Published 03/13/2017
Products Featured in This Question
Question:
I am building a new 14inch single axle trailer and purchased the e54SR springs and want to make sure I am installing them correctly. Can you tell me which hanger kit I should purchase? I previously ordered individual hangers # 115917, 30-20 and shackle straps TRSL350. Will these items work or is there a better kit to use and also can you tell me what the spacing should be on the hangers? Ronnie
asked by: Ronnie J
Expert Reply:
The spring you ordered # e54SR would work well with the hangers # 115917 and # 30-20 with shackle straps # TRSL350. These parts are very similar to what comes with the # APS1 which is what is recommended with the springs you ordered.
Only thing else you might need is the shackle bolt part # 166081.
The distance between the hangers would need to be 24-7/8 inches.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Search Results: trailer suspension parts
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Search Results: spring hangers
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Outer Diameter of Bushing on Suspension Hanger Part # 30-20
- Q&A: Replacement Hangers, Wet Bolts, And Shackles for Single Axle Trailer
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Replacement Bushing for Rear Hanger with Bushing 30-20
- Search Results: trailer leaf springs
- Search Results: clamps
- Video: Comprehensive Review: CE Smith Swivel Bracket for Boat Trailers
- Video: An In-Depth Look at the CE Smith Swivel Bracket for Boat Trailers
- Video: Feature Review CE Smith Swivel Bracket for Boat Trailers
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Single-Axle Trailer Hangers for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Video: Hands-On with the Replacement CE Smith Heavy Duty, Vertical Bunk Bracket
- Shop: CE Smith Heavy Duty Swivel Bracket - Galv Steel - 2-1/2" Hole Centers - Qty 1
- Shop: CE Smith Swivel Bracket for Boat Trailers - Aluminum - 2-1/2" Hole Centers - Qty 1
- Video: Measuring To Choose The Right Trailer Axle
- Video: Breaking Down the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Leaf Spring for 2015/2016 Riverside Retro 195
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Wiring Diagrams
on Trailer Leaf Springs
