Replacement Bushing for Rear Hanger with Bushing 30-20
Updated 10/14/2025 | Published 12/30/2023
Products Featured in This Question
Question:
Is the bushing available without the bracket? Mine is seized to the bolt.
asked by: Blake
0
Expert Reply:
The bushing on the Rear Hanger with Bushing # 30-20 has a 9/16" diameter and is 1-3/4" long so you'll need to use one of the bushings in the Dexter Bronze Bushings Kit # K71-291-00 as a replacement.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
Continue Researching
- Search Results: l68149
- Search Results: leaf spring shackle
- Search Results: seal cross reference
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Hands-On with the CE Smith Trailer Suspension Shackle Straps
- Shop: Lippert Grease Seals - Double Lip - ID 1.719" / OD 2.565" for 3,500-lb to 4,400-lb Axles
- Shop: Lippert Replacement Standard Shackle Links - 2-1/4" Long - 0.224" Thick - Qty 4
- Shop: Lippert Replacement Standard Shackle Links - 3-1/8" Long - 0.224" Thick - Qty 4
- Shop: Lippert Replacement Heavy-Duty Shackle Links - 3-1/8" Long - 0.5" Thick - Qty 4
- Search Results: manual tongue jack
- Search Results: tongue jack
- Search Results: trailer jack
- Shop: Bronze Bushings - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 4
- Shop: etrailer Sidewind Trailer Jack w/ Tongue Weight Scale - A-Frame - 14" Lift - 2,000 lbs
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: Determining the Capacity of a Square Trailer Axle
- Q&A: How to Determine Axle Weight Capacities on a Trailer
- Q&A: Troubleshooting Hub Issues After Replacing A 17146 Grease Seal With An RG06-050 Grease Seal
- Q&A: 2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs
- Video: What to Know About the Front/Center/Rear Hanger for Double-Eye Springs
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Video: Comprehensive Review: Single-Axle Trailer Hangers for Double-Eye Springs
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Search Results: trailer suspension parts
- Video: Feature Review CE Smith Swivel Bracket for Boat Trailers
- Video: Comprehensive Review: CE Smith Swivel Bracket for Boat Trailers
- Video: An In-Depth Look at the CE Smith Swivel Bracket for Boat Trailers
George M.
10/14/2025
In my experience this is a steel bushing with 9/16" inner diameter but has a larger outside diameter and is longer than the Dexter k71-291-00 spring eye bushing. So, is there a correct replacement available for this bushing?