Outer Diameter of Bushing on Suspension Hanger Part # 30-20
Updated 03/29/2011 | Published 03/28/2011
Question:
Hello, Is the bushing available separately from the hangar and what are the Outside Diameter of the bushing.
asked by: Eric F
0
Expert Reply:
The bushing on the Rear Single Axle Trailer Suspension Hanger is welded in place, and is not available separately.
I walked out to our warehouse and pulled one of the hangers off the shelf. The outer diameter of the bushing is .76 of an inch as measured by a digital caliper.
expert reply by:
Mike L
0
Product Page this Question was Asked From
Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 2-1/8 Inch Tall
- Single Axle
- Dexter
more information >
Continue Researching
- Search Results: trailer suspension parts
- Search Results: spring hangers
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Shop: Rear Hanger with Bushing for Single Axle Trailer Suspensions with 1-3/4" Double Eye Springs
- Q&A: Replacement Bushing for Rear Hanger with Bushing 30-20
- Search Results: trailer leaf springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: What are the Proper Components Needed to Install the Leaf springs On a Trailer
- Q&A: Replacement Hangers, Wet Bolts, And Shackles for Single Axle Trailer
- Q&A: Hangers to Use with Leaf Spring e54SR
- Search Results: clamps
- Video: An In-Depth Look at the CE Smith Swivel Bracket for Boat Trailers
- Video: Feature Review CE Smith Swivel Bracket for Boat Trailers
- Shop: Single-Axle Trailer Hangers for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Video: Hands-On with the Replacement CE Smith Heavy Duty, Vertical Bunk Bracket
- Shop: CE Smith Heavy Duty Swivel Bracket - Galv Steel - 2-1/2" Hole Centers - Qty 1
- Shop: CE Smith Swivel Bracket for Boat Trailers - Galvanized Steel - 2-1/2" Hole Centers - Qty 1
- Video: Breaking Down the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: boat trailer parts
- Q&A: Replacement Leaf Springs for a Boat Trailer Rated for 3,740 Pounds Gross Trailer Weight