How to Store Settings for Different Trailers on Prodigy P3 Electric Brake Controller

Question

Question:

Tekonsha p3, I cant find instructions on how to store settings for different trailers. The menu on the screen doesnt let me do anything other than change color or change the Boost.

asked by: Rick

0

Expert Reply:

To store different trailer settings on the Prodigy P3 # 90195 you will need to hold down the "Boost" button for about 2 seconds until the "Select" menu is displayed. Then choose which trailer you'd like to save and record your settings.

expert reply by: Charles S

0

Ugottabkiddinme

6/27/2025

You gotta be kidding me, how stupid is it to not put this ANYWHERE in the instructions????

Robin H.

6/28/2025

@Ugottabkiddinme it should be on page 8 under Select Storable Settings. See the instructions linked a little further down on this page.

Answer 1

Load range capacity varies based on the tire size and brand, so without knowing either, it's hard to say. For example, a load range D tire in size 145/80-12 has an average capacity of 1,220 lbs, while a load range C tire in size 185/80-13 has an…

view full answer...

Answer 2

I've linked the Instruction manual for the Prodigy P3 #90195 on this page. It does show the install as well as the setup process. To reset the P3 unplug it for at least 15 minutes and it will default back to its original settings.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

How to Store Settings for Different Trailers on Prodigy P3 Electric Brake Controller

Featured Help Information

Miscellaneous Media

Continue Researching