What Vehicles Will the Curt Class II Trailer Hitch C12289 Fit

Question

Question:

I was wondering what other vehicles besides a 2005 Dodge caravan the might fit.

asked by: Tina

0

Expert Reply:

The Curt Trailer Hitch Receiver Class II # C12289 referenced in your question fits the following vehicles:

2005-2007 Dodge Caravan with Stow-N-Go seats
2005-2007 Dodge Grand Caravan with Stow-N-Go seats
2005-2007 Chrysler Town and Country with Stow-N-Go seats

expert reply by: Chris R

0

Answer 1

I recommend going with the Curt Trailer Hitch Receiver #13389 because it's the only 2" hitch receiver option that is compatible with the Stow-N-Go seats on your 2007 Dodge Caravan. By installing the 2" hitch receiver you'll be able…

view full answer...

Answer 2

The Curt Trailer Hitch #C12289 will in fact, fit your 2005 Dodge Caravan SE. The hitch will not interfere with any of the vans VMI modifications as it does not get close enough to the rear axle. Additionally, when the hitch it fully installed it is…

view full answer...

Answer 3

I did some checking and your 2007 Dodge Grand Caravan has a towing capacity of 3,700 lbs so you'd be within capacity to tow a 3,200 lb trailer. For a hitch you'd want the part #75305 for if you have the stow n go rear seats or part #75119 for…

view full answer...

Answer 4

There is a trailer hitch receiver fit for your 2005 Chrysler Town and Country with Stow-N-Go seats: - etrailer Trailer Hitch Receiver #e39KR I verified for you that this is the correct fit for the Stow-N-Go seating on your Town and Country, and does…

view full answer...

Answer 5

You'll need one of the following etrailer trailer hitches for your 2007 Chrysler Town and Country depending on if you have the Stow-N-Go seats or not: With Stow-N-Go Seats - #e39KR Without Stow-N-Go Seats - #e43KR The Stow-N-Go seats take up…

view full answer...

Answer 6

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

What Vehicles Will the Curt Class II Trailer Hitch C12289 Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching