To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
With a 4,000-lb maximum gross trailer weight and 400-lb tongue weight rating, this hitch is made for everyday towing and hauling. The 2" x 2" receiver opening works with most bike racks, cargo carriers, and ball mounts, so you can haul bikes or small trailers without adapters. When paired with weight distribution, the capacity increases to 5,000 lbs GTW and 500 lbs TW, giving extra margin for heavier loads.
This hitch bolts directly to the frame using factory attachment points—no welding required. The complete hardware kit comes in the box, so you can install it in your driveway with common tools. It’s a solid choice for DIYers who want to add utility without special equipment or professional help.
The fully welded steel construction gives the hitch the strength to stand up to repeated use without flexing or bending. A gloss black powder coat finish over a protective base coat helps resist rust and corrosion, even in harsh weather. The finish also keeps the hitch looking clean and sharp under the bumper after years of towing duty.
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
Ratings & Reviews
Installed per instructions, 30 minutes with no issues. Perfect fit, also, not a shin knocker. (receiver does not protrude past bumper face)
Great Product, was a little harder to but on then is said. Part of it was the bolts were tough to get off, the wires that they give you break easily so if you have to tug on them I would re-enforce them. The hitch itself is great, just used it to tow a trailer from Colorado to Texas.
The trailer hitch was delivered perfectly the box was a extra heavy box so it came in one piece. And it was delivered before they promised it I am extremely happy
It worked fine and I would give it 5 stars except the installation was more difficult than it should be, the two front bolts did not match the holes in my frame and required some cutting and drilling. Apart from that it was good quality and a good fit.
The product was delivered on time and was exactly as advertised. Plug and Play into the existing wiring harness. Using the instructional videos on the website, the harness was neatly installed.
I put a 2-inch receiverhitch from ETrailer on my 2002 Chrysler Town & Country. It is so well-made & strong as an ox. A rare bargain for the price! Very satisfied.
I was satisfied with the quality of the product and the prompt delivery. However, the installation video was somewhat misleading. Perhaps, it should have included an explanation that the trailer hitch cannot be easily installed UNLESS you remove the rear bumper and showed potential buyers how this is done on this type of vehicle. It took me probably 4 hours because initially I was trying to get this done without removing the bumper.
Hitch worked great & was easy to install. We've used E-trailer for trailer LED lights and we've been pleased with the products, prices and delivery.
I own an automotive repair shop and buy almost all of my hitches, wiring and brake controllers from Etrailer and have great success. They always set me up properly with what I need and ask the right questions. Thank you for making this hassle free!
Product is great. Exactly what I expected it to be. This is the second time I have purchased through etrailer.com. First, always buy the Vehicle specific wiring harness. It makes things so simple and saves hours of time. Second, the customer service, product offerings, speed of shipment and delivery is the BEST ON THE INTERNET!!! I got an email within an hour of my purchase saying it was completed and shipping that day. Product arrived a day early. I am a customer for life!!!
Not to mention the how to videos are such a time saver.
Installed this alone with just a floor jack. Easy installation.
The hitch is awesome but the installation was very difficult. I am an import automotive mechanic and have been at it for over 40 years. This install on a 02' Dodge Caravan was not entirely like the video i watched. First of all, getting past the plastic covering the frame rail entrance was all but impossible. Then you had to get past 1 bolt on the way to the front entry hole. Managed to pull the fish wire off the end of the bolt trying to get past it. At this point i opted to weld the front tab and bolt hole to the frame rail. With the remaining wire fish , i was able to install the back 2 bolts with little difficulty except for the afore mentioned plastic covering in the frame rail.
Great product, great price! Delivery was fast and all components were packaged and padded well. The hitch fit like a glove on my 2001 Chrysler Town & Country. and installation went smoother than expected. Thanks for the informative video on installation provided on your website. Highly recommend that several days prior to installation that you start treating your original frame to bumper bolts (the two that require removal) with liquid wrench or break-free, as this is the only part of the process that could give you difficulty. Mine came out without breaking, but it takes an impact wrench, and they were understandably stubborn after 17 years!
Thanks again etrailer for providing such fine service and value!
I have a 2002Chrysler town and country minivan with a rear swaybar. And this hitch installed without any problems. The tricky part was fishing the bolts thru the frame but was not a big deal once the plastic cover is pushed out of the way. The bolts lined up as they should and took less than an hour for the completed installation.
Installed hitch on 2001 Chrysler Town and Country. Installation relatively simple. I watched the video for this hitch and also watched the videos for the "Hidden Hitch". (Code: 87717) The videos had bunch of great tips!
The plastic cover on the end of the frame rails are a pain. I have bigger hands and arms, and it was difficult to put my arm in the area between the frame and bumper to bend the plastic cover inward into the frame to pass the bolt and square washer. It is possible to get in the area to do it! It only ships with two fish wires, but installing the hitch one side at a time (driver then passenger) worked great. The mounting area of the hitch was slightly bent inward on the hitch I received. I was able to get it bent back out using some wrenches. You may want to hold up the hitch to verify the alignment of the holes. Overall time took me about 1 hour to install (most of the time was searching for tools in my parents garage). I Jacked up the back end and put jack stands under the axle to make room enough to easily work on it. It could be installed with only one person, but simplifies the process to have an extra hand.
Thank you so much for my product. I got it in and I'm excited. Here are some pics
Fast delivery, Came with everything I needed to install,Very simple directions.
I have never had to fish bolts thru a frame before, but with the tool they give you it was done Quickly , to my amazement.
It came in on a timely fashion. I noticed hitch was poking out of the box. I also noticed one of the hand grips at the bottom of the box was ripped open. I was surprised to find all the hardware loose in the box and not in a separate bag. Seems ridiculous as the box didn’t properly fit the hitch. As a result of the holes in the box, I’m missing some of the hardware. In the future, I would hope you instruct your shipping department to put the hardware in a separate bag taped to the hitch that would alleviate some of the hassle I’m gonna have locating the correct bolts and nuts.
First of all, this Curt is a nice SOLID, WELL MADE hunk of American Iron! A++ for that! But this seller Etrailer.com is also AWESOME! They shipped quickly, and had EXCELLENT communication all along the way, right up till delivery! Oh, and it came with all necessary grade 8 hardware, AND rather ingenious fish wires to fish the bolts thru with! Seriously guys, just buy here!
Rick L.
6/23/2024
Yep, made a super good decision! - the hitch has performed flawlessly, and the powder coating still looks pretty new. OF COURSE nothings going to go wrong with this in a year! Even with all the salt they use in the Northeast, I fully expect that this hitch will probably outlast the truck!!
Looks great
Was very easy to install. Just a minor modification to the frame rail. The install went quickly.
Michael
5/8/2023
This product still works great. Install was easy and seems it will last
It was a bit of work to get the old bolts out. It fits. It's solid. More than I need for the bike rack.
Good fit! I installed it, using the informative videos (on my 1997 town and country, I did have to drill two holes). Very satisfied so far!
Victoria H.
2/27/2025
Hi Matthew, that's awesome that install went so smoothly for you and that the videos were helpful! Are you using this to tow?
Very happy with the hitch and the installation went Great and delivery was better than expected I will shop here again
Great fit and I appreciate having items to help fish the bolts through the frame, it greatly reduces the headache of installation. I have a YouTube channel where I did an installation video at Bulldog's Automotive Adventures
Lazer S.
6/16/2026
Sounds like you are liking it so far, Terry! And thanks for shooting the video! What will you be using it for now that it's on?
Lazer S.
6/17/2026
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larry
10/26/2022
Fine. Have only used it once for a rental trailer to haul a motorcycle.