etrailer Trailer Hitch Fits for a 2007 Chrysler Town and Country

Question

Question:

What etrailer hitch do I need for my Chrysler Town and Country 2007?

asked by: Abraham

0

Expert Reply:

You'll need one of the following etrailer trailer hitches for your 2007 Chrysler Town and Country depending on if you have the Stow-N-Go seats or not:

With Stow-N-Go Seats - # e39KR
Without Stow-N-Go Seats - # e43KR

The Stow-N-Go seats take up extra space underneath your van which is why there are different fits.

If you are installing a hitch to use a bike rack then I recommend checking out the Thule Apex Swing XT Bike Rack # TH9027XT which is perfect for families as it gives you space for 4 bikes but can also swing out of the way for when you need access to the rear hatch cargo area. This is a hanging style rack though so if any of your bikes are kid sized or don't have a horizontal top tube you'll need an Adapter Bar # TH982XT to properly install the bike(s).

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

There is a trailer hitch receiver fit for your 2005 Chrysler Town and Country with Stow-N-Go seats: - etrailer Trailer Hitch Receiver #e39KR I verified for you that this is the correct fit for the Stow-N-Go seating on your Town and Country, and does…

view full answer...

Answer 2

I did some checking and your 2007 Dodge Grand Caravan has a towing capacity of 3,700 lbs so you'd be within capacity to tow a 3,200 lb trailer. For a hitch you'd want the part #75305 for if you have the stow n go rear seats or part #75119 for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

etrailer Trailer Hitch Fits for a 2007 Chrysler Town and Country

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching