Replacement Trailer Clearance Lights for GloBrite 122r/122y

Question

Question:

need the hole unit 2. 122r/122y glo-brite need part #

asked by: Larry

0

Expert Reply:

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the # MC68RB and # MC68AB.

If you want to go larger, then I recommend the 4x 1-1/2 inch LED # MCL17RB and # MCL17AB.

expert reply by: Jason S

0

click to enlarge

Guadalupe C.

6/26/2020

I need a lens red 3.75 x 1.70 n .75 depth the lens optronics saw ar2 17 dot is .5 in depth and will not fit over the light

Reply

Chris R.

6/30/2020

Is there by chance a number stamped anywhere inside the existing light housing? Replacement lenses just need to be exact to I want to try and verify the right part based on the model.

Reply

Answer 1

The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…

view full answer...

Answer 2

The correct replacement operator mechanism for your MaxxFan 4700K is #MA10-20281K-1AF, if you are unable to open the vent lid even manually, this is the part you need to replace. I attached a photo of the fan's diagram to give you an idea of…

view full answer...

Answer 3

The Magnadyne RV5090 is definitely a giant brick so you'll want to go with a Double Din option like the Jensen RV Stereo w DVD Player #JWM60A to maintain the same footprint. The cutout dimensions I could find for it were 9-1/4" W x…

view full answer...

Answer 4

There are three types of hinges for replacement roof vents: 3 point, 4 point, and continuous. Replacement #BV0534-00 has a closed round hinge, which is continuous. It sounds like you need either a continuous hinge that is not closed such as…

view full answer...

Answer 5

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 6

Since the remote works we know the board isn't totally shot. I'm guessing it is the wiring for the control switch. All you can really do is check that wiring to make sure it is secure and no corrosion is present at both ends. If you decide to…

view full answer...

Answer 7

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 8

One of the frustrating differences between lighter duty trailer wiring and heavier duty trailer wiring is that the lighter duty setups have the stoplights combined on the same circuit as the turn signals whereas the heavier duty setups have them…

view full answer...

Answer 9

Hello Ronald, thanks for reaching out. The best thing to do here will be to use the Hayes Air Actuated Trailer Brake Controller #HA100400C. This will allow you to control the electric brakes on your 5th wheel with your 2013 Peterbilt 337 day cab with…

view full answer...

Answer 10

We do offer brake controllers such as the Hayes Air Actuated Trailer Brake Controller #HA100400C that takes in air pressure and converts it to an electrical signal for trailer brakes, but this item is not compatible with electric-over-hydraulic…

view full answer...

Answer 11

You certainly can! Installing a brake controller is fairly easy if you are familiar with running wiring. To install a brake controller like the popular Tekonsha Prodigy P3 #90195 you will need to run the wires on the pigtail to the following…

view full answer...

Answer 12

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Replacement Trailer Clearance Lights for GloBrite 122r/122y

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching