Trailer Hitch Receiver Fit For 2005 Chrysler Town and Country With Stow-N-Go Seats

Question

Question:

Hitch for Chrysler 2005 Town and Country, with stow and go seats.

asked by: Gary C

0

Expert Reply:

There is a trailer hitch receiver fit for your 2005 Chrysler Town and Country with Stow-N-Go seats:

- etrailer Trailer Hitch Receiver # e39KR

I verified for you that this is the correct fit for the Stow-N-Go seating on your Town and Country, and does not require any drilling or other modification to install.

The only other thing you may need, if you plan on doing some towing, is a trailer wiring harness. The correct fit for your '05 Town and Country is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118300.

expert reply by: Kyle S

0

Answer 1

I did some checking and your 2007 Dodge Grand Caravan has a towing capacity of 3,700 lbs so you'd be within capacity to tow a 3,200 lb trailer. For a hitch you'd want the part #75305 for if you have the stow n go rear seats or part #75119 for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You'll need one of the following etrailer trailer hitches for your 2007 Chrysler Town and Country depending on if you have the Stow-N-Go seats or not: With Stow-N-Go Seats - #e39KR Without Stow-N-Go Seats - #e43KR The Stow-N-Go seats take up…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Hitch Receiver Fit For 2005 Chrysler Town and Country With Stow-N-Go Seats

Featured Help Information

Miscellaneous Media

Continue Researching