How to Disconnect Prodigy P2 Brake Controller on a 2007 Dodge Ram

Question

Question:

Took the truck in for radiator work and now the box wont turn off it did before.How can I disconnect it I cant stand it being on non stop and I dont use it at all.

asked by: Pam

0

Expert Reply:

To disconnect the Prodigy P2 Brake Controller # 90885 you simply locate where the wiring harness inserts into the back of the controller and unplug it. To uninstall the bracket you just take the screws out and remove the bracket.

expert reply by: Jon G

0

Answer 1

I attached a picture that points out where the release tab is for the harness that plugs into the Prodigy P2 part #90885 that you have. You have to pull up on it so that the harness will separate.

view full answer...

Answer 2

To remove the Tekonsha Prodigy P2 #90885 you simply need to detach the harness at the rear of the brake controller. Once that is removed you can tuck the harness up under your dash with some zip ties andthe uninstall the bracket that holds the brake…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Thanks for letting us help Brian. Great catch! Yes, the etrailer Trailer Hitch Receiver #e76ZV will definitely still work with your RAM with the single passenger side exhaust. This will likely make installation easier than what is shown in the video…

view full answer...

Answer 7

Hello again Brett, Congrats on the new truck! I am pretty sure that the connector on the back of your 2024 Ram 1500 Classic is a 7-way connector, you are supposed to count all the slots and include the piece in the middle. I attached some pictures…

view full answer...

How to Disconnect Prodigy P2 Brake Controller on a 2007 Dodge Ram

Featured Help Information

Miscellaneous Media

Continue Researching