How to Uninstall the Tekonsha Prodigy P2 # 90885

Question

Question:

What is the best approach to removing this completely. I recently bought a Toyota Tundra and I won’t be towing anything so I’d like to remove the entire device.

asked by: Matt

0

Expert Reply:

To remove the Tekonsha Prodigy P2 # 90885 you simply need to detach the harness at the rear of the brake controller. Once that is removed you can tuck the harness up under your dash with some zip ties andthe uninstall the bracket that holds the brake controller as well.

If you jump to the 2:17 mark of the attached video you can see our team member installing the bracket and connecting the harness. Just do what he does but in reverse order and you are good to go!

expert reply by: Jon G

0

click to enlarge

Answer 1

I attached a picture that points out where the release tab is for the harness that plugs into the Prodigy P2 part #90885 that you have. You have to pull up on it so that the harness will separate.

view full answer...

Answer 2

To disconnect the Prodigy P2 Brake Controller #90885 you simply locate where the wiring harness inserts into the back of the controller and unplug it. To uninstall the bracket you just take the screws out and remove the bracket.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Hello again Brett, Congrats on the new truck! I am pretty sure that the connector on the back of your 2024 Ram 1500 Classic is a 7-way connector, you are supposed to count all the slots and include the piece in the middle. I attached some pictures…

view full answer...

Answer 10

Thanks for a great question, Justin! I completely understand the confusion, and I can help clear things up. There are two different ways you can add a hitch to your 2024 Ram 1500 Classic. You can either mount a hitch directly to the frame or mount…

view full answer...

How to Uninstall the Tekonsha Prodigy P2 # 90885

Featured Help Information

Miscellaneous Media

Continue Researching