Recommended Galvanized Hubs Assemblies With 4 Bolts For Boat Trailer
Published 01/31/2017
Products Featured in This Question
Question:
What I need is a galvanized hub 4 bolt pattern (4inches) kit (with bearings packed) pre greased that will fit a 68" (2" wide) axle with 1 1/16" spindles. Also the axle is the type with the zerk on the end where you can add grease, so I don't think I need the easy grease hub type. I would also like to use some other fitting other than the normal hub cap as this is for a boat trailer. Thank you!
asked by: Reid
Helpful Expert Reply:
Since you have the spindles with the zerk on the end, I recommend the EZ lube that you mentioned because it is designed to give you easy access to that zerk by removing the plug and not the entire cap. For this assembly, you will want the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - Galvanized # AKIHUB-440-2-G-EZ-2K. If you really don't want the EZ lube access, you can use the AKIHUB-440-2-G-2K with the solid caps.
We don't have any assemblies already grease packed as you need the spindle to do that complete job correctly. If you need a grease gun, I recommend the LubriMatic Mini Grease Gun with Marine Corrosion Control and Trailer Bearing Grease # 30-800 and # L54FR., and you may want the Bearing Packer # PTW1218. I've attached a video on packing bearings which needs to be done before installation. Once you install these hubs, you then just need the zerk in your spindle to maintain them.
With either application, you don't need any additional cover or cap. They are designed for marine use.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: A Closer Look at the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Search Results: ez lube hub
- Search Results: grease
- Search Results: boat trailer parts
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Dexter Multipurpose High Temperature Lithium Grease - 1 lb
- Q&A: Hubs Came Packed With Red Grease - What Kind Of Grease Should I Use To Fill Bearing Buddies
- Q&A: Does Dexter Trailer Axle Part # 20545I-EZ-60-10 Come with Washer and Spindle Nut
- Q&A: Are Spindle Washers Needed if the Trailer Axle Does Not Already have Them
- Q&A: Replacement Spindle Washer For Dexter 2,000LB Trailer Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Washer For 1" Spindle
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Dexter Multi-Purpose Lithium Grease - 14 oz. Cartridge
- Search Results: trailer hubs and drums
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Search Results: 5~101
- Q&A: Washer Recommendation for Trailer Spindle that has Flat Tab That Matches Spindle Surface
- Q&A: Replacement Trailer Hub for the TDE 46205 with Galvanized Finish
- Q&A: How to Choose Correct Replacement Hubs for Boat Trailer with 2,200 lb Axle
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: How to Choose a Trailer Brake Controller
on Trailer Hubs and Drums
