Availability of 175/80R13 Tire Mounted to Trailer Wheel with 5 on 4-1/2 inch Bolt Pattern

Question

Question:

i would like to buy this tire mounted on a galvanized 5x4.5 rim. TTWTRTM1758013C can you supply?

asked by: Keith

0

Expert Reply:

The closest we have is the part # TA73RR which is the tire you want on a silver powder-coated rim with a 5 on 4-1/2 inc bolt pattern.

We have similar setups like the part # AM3S060 that does use a galvanized wheel but it uses a load range B Kenda tire and not the Taskmaster. We also have the # AM31994 with a Kenda Load range D.

I wish we had the ability to mount tires here but we do not at this time.

expert reply by: Jameson C

0

Answer 1

It is not recommended that you use a bias ply tire on a trailer that has radial tires. Due to the different constructions of either tire the ride will be different on each wheel and would most likely cause sway that could be hazardous to you and…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Great question, William! The Karrier ST225/75R15 #KE63KV is a KR35 while the Karrier ST225/75R15 #AM10303 is a KR03 according to Kenda. There is a slight variation in the tread pattern and from what Kenda says about them it looks like the KR03 is…

view full answer...

Answer 9

Hey Michael, thanks for reaching out! The wheel is the same. The difference between the Kenda #AM32424 and the Kenda #KE94WV parts is the tire. The former is a standard Karrier tire while the latter is a Karrier KR53 which is supposed to be more of a…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...

Answer 12

Hey Mike. The Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Black Aluminum Wheel item #KE63JV comes mounted and ready to install. However, it is not balanced and this is common amongst trailer tires. Trailer tires are lug-centric…

view full answer...