Replacement Threaded Hitch Pin that Can be Locked for Yakima Bike Rack

Question

Question:

I have purchased a Yakima Quarter ROC two-bike rack that fits into smaller 1 inch trailer hitch receiver and need the threaded pin for it. I would also like to get the lock for that pin. Help! Thx!

asked by: Joe F

0

Expert Reply:

I reached out to my contact at Yakima and their bike racks use either # Y8890176 for racks that fit a 1-1/4 inch receiver and # Y8890200 if the rack fits a 2 inch.

To lock either pin use # Y07235 which attaches over the hitch pin and uses an included SKS core and key.

expert reply by: Charles S

0

Answer 1

I checked with Yakima and the correct replacement hitch pin you need for your BackRoad is the part #Y8890176.

view full answer...

Answer 2

The placement of the ratcheting hook on the Thule T2 Classic 2 Bike Platform Rack depends on the vertical angle that you attach the bike. If you are worried about contact with the bike's fork, you can attach the hooks more toward the top of the…

view full answer...

Answer 3

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

view full answer...

Answer 4

Since most bike carrier manufacturers use proprietary threads for their bike carrier like the Doubledown, the dimensions are not freely acquired. We have the replacement hardware, part #Y8890176 you can use to secure the bike carrier to the trailer…

view full answer...

Answer 5

The bolt that comes with the Replacement Hitch Hardware for Yakima HoldUp Bike Racks #8890260 has 5/8" diameter threads with the coarse (5/8" - 11) thread spacing so it will work for your application.

view full answer...

Answer 6

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

view full answer...

Answer 7

Hey Ak, thanks for reaching out! The Replacement Anti-Rattle Hitch Bolt and Washer for Yakima HangOver Bike Rack #Y52FR has a 4-5/8" overall length. I've attached a photo of this for your reference. Are you needing to replace the hitch pin…

view full answer...

Answer 8

I believe you are referring to the Yakima HoldUp #Y02443. If you need just the HitchLock alone, that is the #Y07235. However, if you need the hitch pin that is compatible with both the HitchLock and the HoldUp itself, that is the #Y8890200.

view full answer...

Answer 9

Hi Scott! For your Yakima HoldUp Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #Y94MX, you will want the following part: Replacement Threaded Hitch Bolt for Yakima HoldUp 2" Bike Rack #Y65YC This is specifically for the HoldUp and will…

view full answer...

Answer 10

Hey Ethan, sorry to be the bearer of bad news but Yakima does not make a longer anti-rattle hitch pin. The pin #Y52FR is the longest one they offer, unfortunately. If there is anything else I can do to help you though, please feel free to let me…

view full answer...

Replacement Threaded Hitch Pin that Can be Locked for Yakima Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching