Mounting Bracket Recommendation for a Torklift GlowStep

Question

Question:

Do you sell just the top mounting strip

asked by: WILLIAM R

0

Expert Reply:

Sounds like you are looking for just the mounting bracket for the Torklift Glowsteps. For that you would need the part # TLA75001 as that is exactly that.

expert reply by: Jameson C

0

Answer 1

Hey Gary, yes we have Torklift camper tie downs that fit your 2025 Ram 2500 short bed with the part #TL73NR. What kind of camper do you have?

view full answer...

Answer 2

To replace the mounting bracket that came with the TorkLift GlowStep Camper Scissor Steps #TLA7805 you need part #TLA75001. If you have these steps installed on your truck bed you need the Stow N' Go Mounting Bracket for Truck Bed Campers…

view full answer...

Answer 3

If you have a 2-1/2 inch hitch installed on your truck then you can use a hitch extender like the Curt part #C45048 which can give you from 24 to 34 inches of extension. You should note that when you use this extender the towing capacity is 6,000…

view full answer...

Answer 4

I may have another option but unfortunately the Brophy Camper Scissor Steps #SS04 you have were not designed to be permanately installed and will not work with the TorkLift GlowStep Stow N' Go Mounting Bracket #TLA7820 you mentioned. The Brophy…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hey Cayton! Are your motorized running boards cab length? Assuming they are, and you have the factory hitch, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL73NR will fit your 2023 Ram 2500 Rebel. You will also need turnbuckles like…

view full answer...

Answer 11

Hey Chris congrats on the new truck! I did some research and the HappiJac Camper Tie-Downs item #LC236326-205221 is exactly what you need for your 2026 Ram 2500. I'm working on getting our website updated as we speak. This kit includes both front…

view full answer...

Answer 12

Hi Ray! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 11.5K to 14K Trailers #MR74MV can definitely be used in a short bed 3/4 ton pickup, like your 2024 Ram 2500. Just be aware that not all trailers have a tapered nose and you may not get…

view full answer...

Mounting Bracket Recommendation for a Torklift GlowStep

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching