Do Yakima 58-Inch Round Crossbars Y8810023 Include End Caps Y8007026

Question

Question:

Do the Yakima 58inch round bars come with end caps are must they be purchased separately?

asked by: Bill H

0

Expert Reply:

The Yakima 58-inch round roof rack crossbar # Y8810023 does not include the end caps so you'll want to order part # Y8007026 (a set of four) for each pair of crossbars. A single end cap is also offered as part # Y8790009.

expert reply by: Adam R

0

Answer 1

We do indeed offer two sizes of replacement end caps for Yakima round crossbars. We offer the smaller diameter #Y80159 that you referenced, and the larger diameter also in a set of four pieces as part #Y8007026. These larger diameter end caps fit all…

view full answer...

Answer 2

The front window deflectors are a compression or tension fit, and do not require any adhesive to remain in place. The outward and downward tension applied against the side and bottom of the door frame will hold them securely in place. I have edited a…

view full answer...

Answer 3

From the sounds of your question, it looks like you are looking for replacement end caps for your Yakima roof rack on your vehicle. If this is the case, the replacements you need depend on which model of Yakima bars you have. Here are the different…

view full answer...

Answer 4

It sounds like you have the round Yakima crossbars on your Jeep Wrangler Unlimited and you're looking for the EndCap #Y8790009 replacement part. This number is for a single unit but if you're wanting more than one (for some spares) you can…

view full answer...

Answer 5

Either the Curt Hitch #13147 or the Draw-Tite Hitch #75650 would work very well for you. The main difference between the two is the tube design like you noticed. There is not an advantage to having a round tube over a square tube hitch or vice versa.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Do Yakima 58-Inch Round Crossbars Y8810023 Include End Caps Y8007026

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching