Trailer Brake Controller Installation in 2014 GMC Savana Van
Updated 08/12/2016 | Published 08/11/2016
Products Featured in This Question
Question:
I have a 2014 GMC Savana 2500 van. Do you have a part number for a wiring adapter for a Tekonsha P2 brake controller that will fit the factory installed tow pkg wiring under the dash? At least I think there is a plug-in that is for a brake controller. It is a tan rectangular shaped piece that looks like where the brake controller would plug in. It seems to be attached to a piece that appears to be for the 7 way wiring for the trailer. Thanks for any and all help.
asked by: Pat R
Expert Reply:
The 2014 GMC Savana does not have a brake controller installation port under the dash, but certainly one of the other connectors under the dash could easily resemble one. A brake controller wiring adapter will have 4 prongs that carry 12V power for the controller, the ground connection, a brake light switch input signal and a 4th that carries the controller output to the trailer connector on a blue wire. Brake controller installation will be hard-wired in your van.
If your Savana has a factory-installed tow package with a 7-way at the back bumper then it will also have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal. Installation of a quality brake controller like the Prodigy P2 # 90885 will require wiring kit # 5506 to connect the controller and its output to the 7-way.
If your truck has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, instead use part # 30955.
As an alternative, you can forget about trying to use the existing wiring and simply do a complete new install using a 4-pole harness # 118392 (easy plug-in installation) and our controller install kit # ETBC7. Apart from the controller itself, these two parts have everything you need to do a complete hard-wired installation. You can see the entire install process by clicking on the linked video.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Lippert Quick Drop RV Stabilizer Jack - Single Leg - 23" Lift - 500 lbs
- Search Results: 3045p
- Search Results: trailer tires and wheels
- Search Results: trailer hitch wiring
- Search Results: brake controller
- Search Results: lr9806j~bip
- Search Results: rv lock v4
- Shop: Replacement Gear Motor Assembly for Lippert Slide-Out
- Shop: Replacement Main Board Assembly for WFCO Auto-Detect RV Power Centers - 45 Amp
- Search Results: r001988blk
- Shop: Towing Mirrors
- Shop: Taskmaster Trailer Wheel Center Cap w/Center Plug - 4.25" to 4.27" Pilot - Stainless Steel
- Shop: Curt Wiring Adapter for Tekonsha Brake Controller
- Shop: Valterra Waste Valve Extension Tube with Handle - 36"
- Shop: Steel Directional Silver Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2
- Q&A: Where is the Brake Switch Wire on a 2014 GMC Savana Van to Install a Brake Controller
- Q&A: Parts Needed to Install 7-Way on 2022 GMC Savana without Tow Package
- Q&A: How Does Brake Controller Install in 2017 GMC Savana Van
- Q&A: Where Do I Connect My 4-Way Wiring Harness On My 2021 Chevrolet Express Van Without Tow Package
- Shop: Trailer Wiring
- Q&A: Installing Tekonsha Brake Controller On A 2020 GMC Savana Cutaway
- Shop: Blind Spot Detection
- Shop: Suspension Enhancement
- Video: In-Depth Review of the Firestone Fuse Circuit Tap Kit
- Video: 2012 Chevrolet Express Van Tekonsha Prodigy P2 Trailer Brake Controller: Complete Installation
- Q&A: How To Install a Brake Controller on a 2013 GMC Savana 2500
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Brake Controller
