Product Experts Available Now!
Call 1-800-940-8924
Curt Wiring Adapter for Tekonsha Brake Controller
(12 reviews)
Price: $13.18
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (12)
- Q & A (0)
- Videos (2)
- Photos
CURT Accessories and Parts - C68VV
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- CURT
- Universal
Wiring adapter lets you easily connect your Tekonsha electric brake controller (sold separately) to your existing Curt brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Features:
- Wiring adapter lets you easily connect your Tekonsha electric brake controller to your existing Curt brake controller wiring harness
- One end plugs into Curt wiring harness
- Other end plugs into your Tekonsha electric brake controller
- 1-Year limited warranty
51532 Curt Wiring Loom Adapter for Existing Tekonsha Brake Controller Connection
Video of Curt Wiring Adapter for Tekonsha Brake Controller
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for The Low-Down on the Curt Wiring Adapter for Tekonsha Brake Controller
Hi, there. I'm Michael with etrailer.com. Today we're gonna take a quick look at this CURT Wiring Adapter. This is going to allow you to easily connect your Tekonsha Electric Brake Controller to your existing CURT Brake Controller Wiring Harness. So you'll just plug this end into your Tekonsha Electric Brake Controller, and then the other end will plug into your CURT Wiring Harness. This adapter is approximately seven inches long from the end of one plug there to the end of the other.
So it's not gonna give you a whole lot of extra length there, but it will make that easy adaptation so that you can use your Tekonsha Brake Controller with your CURT Brake Controller Harness. And that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Ratings & Reviews
4.4
12 reviews
by:
Max
10/01/2026
The Curt Wiring Adapter for Tekonsha Brake Controller worked as described. I installed in 10 minutes and it worked wonderfully. I would recommend this product.
by:
George
03/30/2026
This connector was described as matching the connector on the 2025 Nissan Pathfinder but in fact it does not and is useless to me. I would like to return it free of charge please.
by:
David
01/16/2026
The staff was exceptionally helpful in expediting my order which arrived at the time expected and all the time I was kept updated on the status of the order.
by:
Sam
03/19/2026
Works as it should thank you very much
by:
Kenneth
02/12/2024
Plug and play, super easy.
by:
Trish
04/15/2025
Have not had a chance to hook it up
by:
Robert
03/06/2024
exactly what I needed, at a good price, delivered promptly
by:
Stephen
03/23/2026
by:
Margie
09/05/2026
by:
Chris
03/04/2026
by:
Vernon
05/04/2024
by:
R
11/12/2025
12
12
true
See what our Experts say about this CURT Accessories and Parts
- Brake Controller Wiring Harness for 2024 Nissan Pathfinder With Tekonsha Primus IQHi Stephen! The 3050-P you looked at is the correct Tekonsha wiring harness. However, Tekonsha is for sale right now and parts aren't available. What you can use instead is the Curt # C51382 along with the Curt Wiring Adapter for Tekonsha Brake Controller # C68VV which will let you adapt it to the Primus IQ. What are you towing with your Pathfinder?
view full answer... - Wiring Harness for 2004 Ford F-250 With Cequent Brake ControllerHey Ben! The Curt Custom Wiring Adapter for Trailer Brake Controllers # C51322 will fit your 2004 F-250. However, this is designed to fit Curt brake controllers. You will also need the Curt Wiring Adapter for Tekonsha Brake Controller # C68VV to complete the setup. What will you be towing with your F-250?
view full answer... - Is there a Vehicle Specific Pigtail to Install Tekonsha P3 in 2008 Jeep Grand Cherokee?Hello Gregg, I am not showing that any of the brake controllers have a vehicle specific pigtail for the 2008 Jeep Grand Cherokee. Did you confirm that there is a plug-in under your dash? if so, can you send me a picture of the plug in (please include one where I can see the whole plug, and one close up of the inside) by responding directly to the email that you receive. I am showing that you would need to hard wire the P3 by splicing in the universal pigtail # 7894. Please let me know...
view full answer... - Brake Controller Wiring Harness for Tekonsha Prodigy P3 On 2020 Honda RidgelineHey Jason! I do have a solution, but Tekonsha is for sale right now and most of their parts are not available. This includes the custom wiring harness for your 2020 Honda Ridgeline. What you can use is the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51392. You will also need the Curt Wiring Adapter for Tekonsha Brake Controller # C68VV which will allow you to connect the Curt harness to your P3. What are you towing with the Ridgeline?
view full answer... - Brake Controller Wiring Harness and Air Bags for 2014 E-450Hey Chip! What kind of brake controller do you have? For the 2014 E-450 we have the # 331-TPH-005 for Redarc and # C51432 for Curt. The Tekonsha stuff is out of stock right now since the parent company is bankrupt and they're for sale. However, you can adapt a Curt wiring harness to a Tekonsha controller using # C68VV. Nothing is specifically listed for the F-750 but if the connector looks the same these wiring harnesses will work. For the air bags I recommend the Firestone Ride-Rite Air...
view full answer... - Availability of Wiring Harness for Prodigy P3 On 2026 Ram 1500Hey Christopher! The reason you aren't finding the 3024-P is because Tekonsha is for sale right now and most of their parts are not available. To get around this you can use the Curt Custom Wiring Adapter # C51446 along with the Curt Wiring Adapter for Tekonsha Brake Controller # C68VV. The Curt wiring harness will plug into your factory port and the Curt/Tekonsha adapter will allow you to connect that wiring harness to your P3. What are you towing with your Ram?
view full answer... - Brake Controller Wiring Harness for 2020 Toyota Tacoma With Tekonsha Brake ControllerHi Jeremy! I do have a solution, but Tekonsha is for sale right now so their standard brake controller wiring harness is not something that is available. What you can use instead is the Curt Custom Wiring Adapter # C51455 along with the Curt Wiring Adapter for Tekonsha Brake Controller # C68VV. The Curt harness will connect to your vehicle and then the other Curt adapter will allow you to plug the Curt harness into your Tekonsha controller. What are you towing with your Tacoma?
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Chris R
Updated by:
Wilson B
Installed by:
Michael B
Written by:
Amanda K
Test Fit:
Ian F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
4/2/2026
The # C68VV is an adapter that allows you to use a Curt wiring harness with a Tekonsha brake controller, it's not designed to plug directly into the tow package of your Pathfinder. Which brake controller are you using?