Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hi Duane, You definitely have to remove the underbody panel of your Honda CR-V to install the Blue Ox Trailer Hitch Receiver #BLU55UR. But you may or may not have to trim the underbody panel, as you can see from the cutout of the instructions of theā¦
view full answer...Hey Michael, we have the Draw Tite hitch part #76128 that fits your 2024 Honda CR-V that doesn't require any fascia trimming. This also is the 2 inch hitch size.
view full answer...Hi Ed, We do indeed have trailer wiring harnesses that fit your 2025 Honda Pilot. I went ahead and checked directly with the manufacturer for you and verified there are two options - a 4-way and 7-way: - 4-Way: Curt T-Connector Vehicle Wiring Harnessā¦
view full answer...Hi Jordan, Ok, I think I can clear this up for you, and just to get the final answer for you, the maximum COMBINED weight a cargo carrier and its luggage can weigh in your current setup is 175 lbs (also, apologies for the caps but they don'tā¦
view full answer...Thanks for the purchases Cathy, and the quick answer is nope, a mounting bracket is not needed at all for your 2024 Honda Pilot for the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C48ZV. Pretty simple reason why is theā¦
view full answer...Yes, we do! To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver that has a 6,000 lbs towing capacityā¦
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailerā¦
view full answer...The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes onā¦
view full answer...Our part number for the Yakima BaseClip 180 is the BaseClip Fit Kit #Y06180.
view full answer...I can tell you were to access the correct brake switch wire to install a brake controller on your 2014 GMC Savana Van. You will need to access the wire behind the BCM (body control module) located behind the dash on the passenger's side of theā¦
view full answer...I don't really know what you're asking, but in order to determine the specific problem you'll need to use a circuit tester such as #PTW2993 to test the connector on your truck after disconnecting it from your trailer. Check the wiringā¦
view full answer...The 2014 GMC Savana does not have a brake controller installation port under the dash, but certainly one of the other connectors under the dash could easily resemble one. A brake controller wiring adapter will have 4 prongs that carry 12V power forā¦
view full answer...Filter Your Search
Contact and Help