Spare Tire and Wheel Combo, Size ST185/80-13, Needed for Waverunner Trailer
Published 06/28/2016
Products Featured in This Question
Question:
Need a spare tire and wheel for double waverunner trailer. Info on tire includes H188ST ST185/80D13 6 P.R. Load Range D 1730lbs at 65 PS RIM 5.00
asked by: Vicki S
Expert Reply:
We have a tire and wheel combo that will work great as a spare tire on your waverunner trailer. Since the spare tire is for a trailer that will put into the water, a great option is a tire on a galvanized wheel, such as the Loadstar ST185/80D13 Bias Trailer Tire with 13 Inch Galvanized Wheel, 5 on 4-1/2 Inch Wheel Bolt Pattern, Load Range D # AM3S334.
The tire size, load range, construction, and wheel diameter of the # AM3S334 all match the information you provided from your existing tires. The galvanized finish on the wheel will help protect it from rusting. I've attached a review video of this combo for you.
If you'd rather use a standard tire and wheel combo with a steel wheel, the Loadstar # AM3S331 is also available.
If you need a spare tire carrier for your trailer, our most popular option is the Fulton Hi-Mount Spare Tire Carrier # FSTC1000301. This carrier will work well with the 5 lug bolt pattern of the tire and wheel combos referenced above. The # FSTC1000301 is designed to mount on trailer tongues up to 3 inches wide x 4 inches tall. A review video and an installation video of this carrier are linked for you.
Product Page this Question was Asked From
Loadstar ST185/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range D
- 185/80-13
- 13 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: Installation Instructions for Draw-Tite Trailer Hitch 24795 on a 2007 Hyundai Elantra
- Q&A: Trailer Hitch Fits for 2009 Kia Rio
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Shop: Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Q&A: How to Determine the Correct Wheel and Tire Replacements for a 1979 Wilderness Travel Trailer
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Video: How to Choose a Trailer Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing the Curt Hitch C13416 and EcoHitch Hitch 306-X7396 for a 2019 Toyota RAV4
- Shop: Base Plate for Tow Bar
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer jack
- Video: Installing the Curt Trailer Hitch Receiver on a 2025 Toyota RAV4
- Q&A: Recommended SnapPad Jack Pads for a HWH Leveling System on a Motorhome
- Video: Clean Up Your Trailer Wiring
on Boat Trailer Wheels
