Recommended Torklift Complete Setup for a 2016 Ram 3500 with Eagle Cap 1165 Truck Bed Camper

Question

Question:

I need to know just what I need to get set up with a torklift complete setup to go on a new 2016 Ram one ton truck and reach behind a Eagle Cap 1165 truck camper. The camper dealer suggested 48. it is an 8’ dual wheel (I suspect 4x4) diesel and I don’t know anything about any step other than the probable step where the license plate goes. It does have a factory hitch. I will not know until around the 20th or possibly later which precise Ram we will wind up with. If I understand correctly, this is simply a bolt on installation. Yes?

asked by: Michael T

1

Helpful Expert Reply:

I can help you outfit your 2016 Ram 3500 with a complete Torklift setup.

First thing you will need for your 8 foot bed with factory hitch, is the Torklift hitch # TLD1108, this will give you a second 2 inch receiver on your truck and will allow you to mount the 48 inch SuperTruss hitch extension # TLE1548 to reach behind your Eagle Cap Truck Bed Camper. This hitch is a bolt on application that requires no drilling and will work in combination with your factory hitch. I have linked the instructions for you to check out.

For camper tie-downs, since you aren't sure which truck you will end up with I will list both styles for your convenience. The 8 foot bed with dual rear wheels and 4WD without running boards or a step underneath the truck bed with a factory hitch you will need the Torklift Tie-downs # TLD2124A & # TLD3109A. This will include the front and back tie-downs which have aluminum arms. On dually applications the rear camper anchor point location may require the use of the anchor relocation kit # TLA7004.

If your 8 foot bed ends up coming with running boards or a step underneath the truck bed you will have the option of either the steel arm tie-downs # TLD2127 & # TLD3109 or the aluminum arms # TLD2127A & # TLD3109A. These sets may also need the rear camper anchor point location # TLA7004 on dually applications. I have linked all the instructions to the camper tie-downs as well to this page for you to look at how they will install.

The last item you will need to secure your camper to your truck is the Torklift Turnbuckles. I recommend the Locking FastGun Stainless Steel # TLS9526-2-LK turnbuckles. With these FastGun turnbuckles you won't have to manually tighten them like standard turnbuckles.

I have linked all the above mentioned products to this page for your convenience.

expert reply by: Jackie C

1

Answer 1

The difference between the TorkLift SuperHitch Original D1104 that has been discontinued and the part #TLD1108 that replaces it is a slight design change that allows the D1108 to fit the newer 2018 Ram 3500. Either one will still fit your 2015 Ram…

view full answer...

Answer 2

The TorkLift SuperHitch #TLD1108 will fit your 2016 Ram 3500 and you'll be fine keeping the front tie-downs #TLD2127. However, the rear tie-downs, #TLD3109, will not work with the hitch and instead you'll want #TLR3507. I've linked our…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 12

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Recommended Torklift Complete Setup for a 2016 Ram 3500 with Eagle Cap 1165 Truck Bed Camper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching