bing tracking image
  1. Trailer Hitch
  2. TorkLift
  3. 2 Inch Hitch
  4. Class V
  5. 17000 lbs GTW
  6. Visible Cross Tube
THIS ITEM IS NOT A FIT FOR
1987 Toyota Corolla
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
TorkLift

TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"

Part Number: TLD1108
In Stock
$803.04
Trailer Hitch
Not Confirmed to Fit

1987 Toyota Corolla

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions. Great Prices for the best trailer hitch from TorkLift. TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" part number TLD1108 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (25)
  • Q & A (0)
  • Photos

TorkLift Trailer Hitch - TLD1108

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Dual 2" Receivers: Tow a trailer and carry a bike rack or cargo carrier at the same time
  • Tows up to 17,000 lbs (GTW): Handles heavy-duty loads for campers, boats, and utility trailers
  • Holds up to 1,700 lbs (TW): Supports substantial tongue weight for stable towing and hauling
  • Bolt-On Install: Mounts using existing frame holes with included hardware—no welding required
  • Corrosion-Resistant Finish: Black powder coat protects strong steel construction from wear and rust
Made in USA

Features to know about

Do More at Once: Dual 2" Receivers for Towing and Accessories

This setup gives you two vertically stacked 2" x 2" receivers so you can tow a trailer and still carry a hitch-mounted bike rack or cargo carrier. Instead of swapping gear every time you need to haul something, you can keep both in place and stay ready for any trip. The single-receiver cross tube installs under your factory hitch, maintaining a strong connection without cutting into your towing power.

Built for Heavy-Duty Hauling: Class V Strength with High Capacities

When it comes to pulling weight, this hitch is built to handle serious loads. It’s rated for a maximum gross trailer weight of 17,000 lbs and up to 20,000 lbs when used with weight distribution. Tongue weight tops out at 1,700 lbs (2,000 lbs with weight distribution). The sturdy steel build uses high-penetration, dual-shield welding and hardened, reinforced hitch pin holes to prevent wear over time.

Stay Camper Ready: Pre-Drilled for TorkLift Tie-Downs and SuperTruss Extensions

If you travel with a truck bed camper, the integrated mounting points make it easy to add TorkLift camper tie-downs. You can also use the SuperTruss extension (sold separately) to push the receiver out behind your camper while maintaining high towing strength. Even extended setups can keep impressive capacity when paired with proper weight distribution equipment, so you can haul your trailer with your camper installed.

Truck equipped with TorkLift SuperHitch Original and SuperTruss extension showing dual-receiver towing setup compatible with bed-mounted camper.

Simple Bolt-On Setup: No Welding or Drilling Required

You won’t need to modify the frame or fire up a welder—this hitch bolts on using existing holes. The included bolts, plate washers, and fishwire make installation straightforward using standard tools. With built-in safety chain loops, two included hitch pins and clips, and a corrosion-resistant black powder coat finish, it’s ready for the long haul as soon as it’s mounted.

Specs

Receiver Information

  • Receiver opening: 2" x 2"
  • Rating: Class V

Weight and Capacity

  • Maximum gross trailer weight: 17,000 lbs
  • Maximum GTW when used with weight distribution: 20,000 lbs
  • Maximum tongue weight: 1,700 lbs
  • Maximum TW when used with weight distribution: 2,000 lbs

Dimensions

  • Cross tube dimensions: 3-1/2" x 3-1/2"

Warranty

  • Lifetime warranty

D1108 Tork Lift Original Super Hitch 1 Receiver for OEM Hitch



This Product Fits The Following Vehicles

  • 2013 - 2013 Ram 2500 with factory hitch
  • 2016 - 2018 Ram 3500 6-1/2 Foot Bed with factory hitch
  • 2016 - 2018 Ram 3500 8 Foot Bed with factory hitch
  • 2013 - 2015 Ram 3500 Pickup with factory hitch
  • 2013 - 2014 Dodge Ram Pickup 2500 and 3500 - with factory hitch



Ratings & Reviews

4.6

25 reviews
Review sort icon
Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Always fast delivery



by:

everything fit



by:



by:

Easy to install.



by:

An Excellent hitch



by:

Awesome hitch and not hard two install with a good helper!



by:

Fitment was great. Relatively easy to install. My only complaint would be the manufacturers method of packing. It was not UPS proof. Lost 2 2 inch plates, star washer, 1 bolt and 2 nuts. Hardware was all over the box and a hole was made by the hitch cross bar in the box. No instructions.



by:

Very nice product once installed. I installed this hitch on my 2015 Ram 3500 Dually, and I will say the video that pulls up when installing it on a 2015 3500 was slightly different than my install. The other install video that was provided for the 2018 Ram 3500 was correct, specifically in regards to the front most frame mounting hole. My brackets were not long enough to reach the front-most hole, and therefore had to use the hole right behind it. It had me scratching my head for a while thinking I got the wrong frame brackets. Once I looked deeper into it, I figured it out. Hopefully this saves somebody a couple of hours of head scratching!



by:

eTrailer is GREAT! I use them for all my personal trailer needs. Staff is always out of their way helpful. If you are not 100% sure what you need, call them and they will help and type the order up while you are on the phone with them. I have purchased 5th-wheel leaf spring hitches breaks and misc. Parts. Fast delivery from multiple warehouses. This last purchase was for a 20k torquelift super hitch to pair up with the stock 3500 dually HD class 5 2 1/2 reciver hitch, so that could use the torquelift 48 truss extended hitch and haul my boat with my 12ft cab over camper on. The bass are bitting time to go!

Thanks to William and the team for helping to keep my summer running smoothly!



by:

Excellent product, installation was very easy and worked exactly as it was designed to. I purchased this hitch as well as the 21” super truss extension and was able to pull my 40ft travel trailer all through Colorado with no issues what so ever. I would recommend this for anyone needing to extend their hitch point out to give themselves a little more room so they can lower their tailgate while hooked up or like in my case carry my side by side on top of my bed cover and still be able to turn and not hit the front cap of my RV.



by:

The hitch looks great ,, but the box was damaged when the shipper dropped off the package , the fastener bag that was inside the box was also damaged when I opened up the box ,, I am not sure if all of the fasteners are present .


25
25

See what our Experts say about this TorkLift Trailer Hitch

  • Is the Roadmaster Sway Bar RM46GR Compatible w/a Torklift Superhitch on a 2014 Ram 3500 4WD Dually?
    It sure is Joe, and welcome back! The Roadmaster Rear Anti-Sway Bar item # RM46GR is definitely compatible with the TorkLift SuperHitch item # TLD1108 installed on your 2014 Ram 3500. This sway bar is meant to replace and upgrade your factory one. Do you have a gooseneck, 5th wheel hitch, or factory air ride suspension? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
    view full answer...
  • Can Rock Tamers Mud Flaps Be Used On 2014 Dodge Ram 2500 With TorkLift SuperHitch Original?
    Hey Charles, thanks for reaching out. I see you ordered the TorkLift SuperHitch Original Trailer Hitch # TLD1108 from us about a year ago. This has a 2" receiver so this will absolutely work with the rock tamers for a 2" hitch. For that you can use the following: - Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches - Matte Black # ERT00108
    view full answer...
  • Does Torklift Hitch for 2015 Ram 3500 Require Removing Sway Bar
    Hey Brandon, I am looking at install pictures and videos for the Torklift SuperHitch part # TLD1108 that you referenced and I am not seeing how it would potentially interfere with your sway bar or require it to be removed to install. I attached a link to the install video for you to check out as well.
    view full answer...
  • Options For Pulling a Boat Trailer Behind a 2014 Dodge Ram 3500 with an In-Bed Truck Camper
    The longest extension available that will work with the factory trailer hitch receiver on your 2014 Dodge Ram 3500 is the Trailer Hitch Extender # e48YR. You will need to measure from the center of the hitch pin hole on your trailer hitch receiver to the edge of your truck bed camper to see if this extension is long enough. Keep in mind that a hitch extender like the # e48YR will reduce your trailer hitch receivers capacities by 50%, and has a max tongue weight rating of 350lbs and a max...
    view full answer...
  • Looking for a Hitch Extension for my Ram 3500 with In Bed Camper
    It looks like you're trying to get a good sized hitch extender for your 2018 Ram 3500. The Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long part # RP45018 is designed to fit any 2.5" x 2.5" hitch it then reduces the opening at the end to 2" x 2" for use with many different accessories. While I did not see any specific information regarding an exact figure you are going to loose hitch capacity when you bring the extension out that far without somehow adding some additional...
    view full answer...
  • Will TorkLift SuperHitch Magnum Trailer Hitch Receiver Fit a 2019 Ram 2500 Power Wagon
    Yes, the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1109-30 will fit your 2019 RAM 2500 Power Wagon with the 6-1/2' bed. According to the installation instructions no modification of the spare tire location/support is needed. The receiver actually sits directly below the OEM receiver on your pickup. I have attached a photo of the TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1108 on a 2018 Ram 3500 that you can reference. This isn't the exact same trailer hitch but...
    view full answer...
    Image 1 for
  • Can The TorkLift 36" SuperTruss Hitch Extension Be Used With Dual Hitch Reciever On a 2017 Ram 3500?
    The TorkLift SuperTruss Hitch Extension # TLE1536 is only to be used with TorkLift SuperHitch dual-receiver trailer hitches. It will not fit into the Roadmaster Dual Hitch Receiver Adapter # RM-077-2 as the Torklift only has approximately 3/4" between the receiver tubes. You will need either the SuperHitch Original # TLD1108 or SuperHitch Magnum # TLD1108-30 to be able to use the TorkLift SuperTruss Hitch Extension # TLE1536 on your 2017 Ram 3500. You will also need the TorkLift Wiring...
    view full answer...
  • Using TorkLift SuperTruss Hitch Extension on 2017 Ram 3500
    You are correct that the TorkLift SuperTruss Hitch Extension # TLE1542 features a tongue weight capacity of 600 pounds, increasing the current tongue weight limit you have when using the Reese Titan # RP45292 by just 150 pounds. When using longer extensions like this, even those like the SuperTruss which I absolutely agree offers a more stable setup, tongue weight limits will be a bit lower just because of the amount of leverage that they create. If you decide that it's worth it for the...
    view full answer...
  • Differences Between the TorkLift SuperHitch Original D1104 and D1108 for a 2015 Ram 3500
    The difference between the TorkLift SuperHitch Original D1104 that has been discontinued and the part # TLD1108 that replaces it is a slight design change that allows the D1108 to fit the newer 2018 Ram 3500. Either one will still fit your 2015 Ram 3500 though. I have confirmed this with my contact at TorkLift. Both Original SuperHitch designs are made to work in conjunction with an OEM hitch that has been installed on the pickup. There is a small cutout in the trailer hitch that accommodates...
    view full answer...
    Image 1 for Image 2 for
  • Torklift Hitch that Fits 2018 Ram 3500 Dually Long Bed
    For your 2018 Ram 3500 dually long bed we have the Torklift hitch part # TLD1108 that is a confirmed fit and would work great.
    view full answer...
  • TorkLift SuperHitch Trailer Hitch Receiver Fitment For a 2007 Dodge Ram 3500 With Factory Hitch
    The TorkLift SuperHitch Original Trailer Hitch Receiver # TLD1108 will only fit the 2013-2018 Ram 2500 and 3500 models. Your 2007 Dodge Ram 3500 will require the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLD1102-30 or Original # TLD1102. Both of these fit with the factory hitch.
    view full answer...
  • Truck Camper Tie-Downs to Fit with TorkLift SuperHitch Class V Receiver
    The TorkLift SuperHitch # TLD1108 will fit your 2016 Ram 3500 and you'll be fine keeping the front tie-downs # TLD2127. However, the rear tie-downs, # TLD3109, will not work with the hitch and instead you'll want # TLR3507. I've linked our selection of extensions for you to choose from once you know the length you need. If it is the 24 inch you need it's # TLE1524.
    view full answer...
  • Recommended Torklift Complete Setup for a 2016 Ram 3500 with Eagle Cap 1165 Truck Bed Camper
    I can help you outfit your 2016 Ram 3500 with a complete Torklift setup. First thing you will need for your 8 foot bed with factory hitch, is the Torklift hitch # TLD1108, this will give you a second 2 inch receiver on your truck and will allow you to mount the 48 inch SuperTruss hitch extension # TLE1548 to reach behind your Eagle Cap Truck Bed Camper. This hitch is a bolt on application that requires no drilling and will work in combination with your factory hitch. I have linked the...
    view full answer...
  • How To Use TorkLift SuperTruss Hitch Extension On a 2014 Ram 3500
    In order to use a TorkLift SuperTruss Hitch Extension like part # TLE1532 on a 2014 Ram 3500 you will need the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1108 which installs beneath the factory trailer hitch. In regards to welding your own receiver tube opening below the factory trailer hitch, this is certainly not something I can recommend. It is important to note that there is extra support pieces with the above hitch as well so it's a bit more than just an extra receiver...
    view full answer...
  • Torklift Hitch Recommendation for 2016 Ram 3500
    Torklift has a SuperHitch Original that fits your 2016 Ram 3500 but the Magnum you mentioned part # TLD1103-30 does not fit your truck. Instead we have the part # TLD1108 that would fit and work well. This hitch as a 2 inch opening and a max trailer weight capacity of 17,000 lbs.
    view full answer...
  • Is there a 12 Inch Long Hitch Extender Rated for Towing a 10,000 lbs Trailer with a 2014 Ram 3500
    The hitch extenders that are rated for 10,000 pounds are all for tow bar applications only so we have to take a different approach. If you have the factory trailer hitch that is welded onto your 2014 Ram 3500 then the best option would be to add TorkLift SuperHitch # TLD1108 and then use SuperTruss Extender # TLE1521. When using the SuperTruss extender you would have to then use weight distribution to get the capacity to 14,000 pounds.
    view full answer...
  • Flat Towing Capacity of Reese RP45018 Hitch Box Extension
    At the 48 inch length, the Reese # RP45018 Hitch Box Extension has a 4000 lb capacity, and a 6000 lb rating when used with weight distribution. Even though in your situation, there won't be any tongue weight exerted on the extension, the towing capacity still wouldn't change from 4000 lbs according to Reese. I'm sorry to say at the 48 inch length, the Hitch Box Extension wouldn't be a good choice for your Wrangler Unlimited. It might be possible to use the bar at the 41 inch length, but...
    view full answer...
  • Wiring & Camper Tie-Downs for 2016 Ram 3500 Dually with Arctic Fox 996 Camper
    For a 7-way trailer connector for the bed of your 2016 Ram 3500 dually you can use Tow Ready # 20110 or Bargman # 50-97-410, or for a 4-pole use # C55384. I checked the Arctic Fox website but I could not find details about the 996's trailer connector. For a TorkLift hitch that fits the 8-foot bed with factory hitch you can use TorkLift # TLD1108 which has a 17K towing capacity. For tie downs you can use the linked page to select your specific truck configuration from the drop-down menu...
    view full answer...
  • How to Use Torklift Hitch Extender with 2014 Ram 3500 with Factory Hitch
    To use the Torklift hitch extender part # TLE1542 that you referenced your truck will need to have a Torklift hitch installed on it that has dual hitch openings like the # TLD1108 which fits your truck and gives it a second hitch opening under the factory one for the extender to connect to.
    view full answer...
  • Weight of TorkLift Original and Magnum SuperHitch Models TLD1108 and TLD1108-30 for Ram 3500
    TorkLift SuperHitch Magnum Trailer Hitch # TLD1108-30 weighs approximately 130-lbs. Shipping weight with all packaging materials is 135-lbs. SuperHitch Original Trailer Hitch # TLD1108 weighs approximately 122-lbs, and with packing materials its shipping weight is 127-lbs. The weight difference is mostly due to the different sizes of main cross tube. The Original has a 3-1/2 x 3-1/2-inch cross tube while the Magnum has a 4 x 4-inch cross tube. Both include all necessary mounting hardware...
    view full answer...
  • Can Roadmaster Sway Bar Fit 2014 Ram 3500 SWD with TorkLift SuperHitch Installed?
    Yes, the Roadmaster Rear Anti-Sway Bar # RM-1129-124 will fit just fine with a TorkLift SuperHitch like part # TLD1108 on your 2014 Ram 3500. The reason we have the notes about fitment with 5th wheel and gooseneck hitches for the sway bar is because the mounting brackets for all of these parts are in relatively the same locations whereas a SuperHitch is at the back of the truck so they won't be close enough to get in the way of each other. Attached are some videos for you to check out.
    view full answer...
  • Using Roadmaster # RM-077-2 Dual Hitch Adapter for Towing 5000 lb Travel Trailer
    The Roadmaster # RM-077-2 Dual Hitch Adapter isn't meant for towing a trailer, only for a rolling load like a vehicle being flat towed. We do have other dual-hitch adapters, but using them will lower the tongue weight capacity of your hitch by 50 percent. If your existing hitch has a 600 lb tongue weight capacity, using an adapter of any kind would lower that to 300 lbs, which wouldn't be enough for your travel trailer. There are some possible solutions, however. Curt makes a Multipurpose...
    view full answer...
  • Recommended Superhitch for 2017 Dodge Ram 3500 with No Drilling Required
    The TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" # TLD1108 requires no drilling in your frame to install. It will fit in the holes already in your frame using the bolts and plate washers using a fishwire. This is not a difficult installation, but using the fishing guide wire does take a little time. It is estimated to take a mechanically inclined individual who has not done this before about an hour to install. I've attached the installation details...
    view full answer...
  • Which Torklift Hitch/Replacement Hardware Fits 2014 Ram 3500
    For your 2014 Ram 3500 with a factory hitch the Torklift hitch # TLD1108 is the confirmed fit from Torklift. If you are looking for a hardware kit for this hitch you'd want the part # TLM8003-C1202.
    view full answer...


< Previous
12




Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Hannah L
Updated by:
Hannah L
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Randy B
Test Fit:
Randy B
Employee David F
Test Fit:
David F
Employee Zach D
Video by:
Zach D

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.


Product Experts Available Now!
Call 1-800-940-8924