Replacement 20 Inch Fenders with Skirt for Karavan Trailer Fender

Updated 03/17/2016 | Published 03/15/2016

Products Featured in This Question

Mounting Brackets for Trailer Fender - 8" to 12" Wheels - Pre-Galvanized Steel - Qty 2

(90)

$34.60

Question:

Looking for replacement fenders for these Karavan fenders 206-00039-BL-B but want the skirt. This is the closest I have found, will they fit and are they paintable or do you offer them in black

asked by: John

Expert Reply:

Based on my research, the CE Smith Single Axle Trailer Fenders with Skirts # CE19500-2 that you referenced are very similar to the fenders you mentioned. The CE Smith fenders are designed to work with wheels 8 inches to 12 inches in diameter.

Both fenders are bracket mount, so the # CE19500-2 will work well as a replacement for you. Karavan lists the spacing of the bolt holes on their fenders at 2.41 inches, while the bolt holes on the CE Smith fenders measure 2-1/2 inches apart, center on center. You will want to measure your existing brackets to make sure this bolt hole spacing will work for you. If you need to replace your existing brackets, you can use part # CE26065PGA, which are designed to work with the # CE19500-2 fenders. The CE Smith fenders are also 1/4 inch longer than the Karavan fenders.

The only color these fenders are available in is gray. They are not intended or designed to be painted a different color.

I have attached a review video of these fenders for you.

expert reply by: Victoria B