How to Find Replacement for TDE 11029C Hub Assembly

Question

Question:

I need to replace my hub assembly. The old ones say TDE 11029C. Can you tell me which ones I need just from that number? Thanks,

asked by: Chris L

0

Expert Reply:

I wasn't able to find anything in regard to a replacement part for your TDE 11029C hub assembly, but if you can pull your hub and either look for bearing/grease seal parts numbers or measure the different locations on your spindle then I can see if something matches. To measure your spindle, you'll want to use a digital caliper and measure the locations in the attached photo to the 3rd decimal (1.234 for example).

If you can let me know what you find I can help you to choose a replacement hub from the linked selection.

expert reply by: Jon G

0

click to enlarge

Keith

1/7/2025

Was there ever a replacement found for this hub?(TDR 11029C) If not, I'd like to provide those dimensions so you could find one. Thanks! Keith

Jon G.

1/7/2025

@Keith Chris never got back with me, so if you have those dimensions I can check our parts to see if there are any hubs that will fit!

Timzilla

4/7/2026

@JonG did anyone get back to you with dimensions? I'm adding to the comment thread.

Jameson C.

4/7/2026

@Timzilla Chris never did. Or if he did Jon didn't share it and I'm sure he would have by now. I'd ask Jon but he's no longer with us.

Answer 1

Yes, we do have a couple of idler hubs that fit the item #L44649 inner and outer bearings on your Venture boat trailer. They come in two different lug pattern sizes and are designed specifically for boat trailers. I couldn't get any information…

view full answer...

Answer 2

The Lippert Components Heavy-Duty Replacement Shock - Yellow #LC283280 is 8.625 inches compressed and 13.5 inches fully extended. Your current suspension may extend and retract slightly further but the shocks will be a good replacement based on the…

view full answer...

Answer 3

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your…

view full answer...

Answer 4

In order to determine if hub assembly 8-258-50UC1-EZ will work for you, first know that this assembly is for EZ Lube spindles that require a grease seal with a 1-1/2" inner diameter such as #RG06-020. You are also going to want to remove the hub…

view full answer...

Answer 5

The size of a Bearing Buddy will not be enough to determine the replacement bearings you need. In order to find the correct wheel bearings, you need take apart your hub assembly and looking at the bearings themselves; wipe away the grease and you…

view full answer...

Answer 6

The Trailer Hub Assembly #8-258-5UC1 measures 4-1/4 inches from front to back. As long as you have the length on your spindle, you won't have any issue. That measurement is not including the grease cap, it is just the hub from edge to edge. There…

view full answer...

Answer 7

We do have a boat trailer to fit your Hobie Wave, but we do not have a mast stand. The boat trailer is the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs, part #CE48870. It can carry boats up to…

view full answer...

Answer 8

Hey Kevin I do appreciate you reaching out but I am sorry to say we do not offer an axle that matches your specifications. We have only a few square tube marine axles and they are all much shorter than what you are looking for. We could provide hubs…

view full answer...

Answer 9

All of the license plate lights we have that are listed as submersible are incandescent, not LED. We have Peterson light #M439K and Optronics light #LP97CB. Though the lights are submersible you will need to make sure the wiring connections are…

view full answer...

Answer 10

Good news, I can help you pick out which hub kit will work with your 5 Starr Boat Trailer. I was able to look up your boat trailer and the parts used between packages varied. I can help you pick out which hub kit will fit if you can provide me with…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

I have a entire replacement option for you, but both the Titan BrakeRite and the replacement controller T4834200 you mentioned have been discontinued. They were replaced by the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit #T4813102…

view full answer...

How to Find Replacement for TDE 11029C Hub Assembly

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching