7" Wide x 20-5/8" long x 6" tall. These fenders are made of durable, corrosion-proof, impact-resistant gray polypropylene. Molded-in color won't scratch or wear off. Pre-drilled mounting holes for a simple, bolt-on installation.
Features:
Specs:
Durable Polypropylene Construction
Polypropylene trailer fenders are durable and lightweight alternatives to steel and aluminum fenders. They provide the same amount of protection from road debris as metal fenders at a fraction of the cost. Plus polypropylene fenders won't rust or corrode, which makes them perfect for boat and PWC trailers. Because the color is molded into the plastic on these fenders, there is no exterior paint or finish that can scratch or wear off. And these fenders are UV-resistant, so their color won't fade in the sun.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the CE Smith single axle trailer fenders for 8-inch to 12-inch diameter wheels. You can get one of these fenders for the part number CE19501 or if you need two fenders, you can use part number CE19501-2. Now the round fender is going to cover the tires on your single axle trailer. It's going to act as a splash guard to keep road debris from hitting other vehicles and to help protect whatever cargo it is that you're hauling. It's going to be made from a durable polypropylene construction. It's corrosion proof and rust resistant. Now this particular fender is going to be gray in color and the color is actually molded into the plastic so it's not going to scratch or wear off over time.
It is a bolt on installation. It's going to feature the predrilled mounting holes. It's going to let you easily attach the fender to your trailer's existing brackets. Now if you don't have existing brackets you can purchase some separately from etrailer.com with part number CE26065PGA. It's going to come in a two-pack so it's going to be good to mount one fender. It simply goes under that portion there and all you've got to do is line up the holes in the bracket with the holes in your fender and then simply mount it to your trailer.
CE Smith products are going to be made in the USA. Again, this is designed for single axle trailers with 8-inch to 12-inch diameter wheels. We're going to go over the overall measurements real quick starting with the overall length measuring from edge to edge. It's going to give us a measurement of about 20-5/8 of an inch. If we take a look at the overall height it's going to be around 6 inches. Overall width is going to give us a measurement from outside edge to outside edge of about 7 inches.
Those predrilled mounting holes are going to be separated center on center by 2-1/2 inches. Again, you're going to have two predrilled holes on this side of the fender as well as this side. That's going to do it for today's review of the CE Smith single axle trailer fenders for 8-inch to 12-inch diameter wheels. Again, it's going to be available as an individual fender with part number CE19501, where if you need two fenders you can use part number CE19501-2. .
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.