Can the BOLT Hitch Locks Be Reprogrammed to a New Vehicle

Question

Question:

I had a question about your Bolt hitch pins that uses your own vehicle key. My question is once you set it up using your vehicle key can it be changed to use another vehicle key if you were to change vehicles?

asked by: Rick

1

Helpful Expert Reply:

The BOLT locks we carry that key to the vehicle's key can only be programmed one time. If you change vehicles you will need to get a new lock.

expert reply by: Jameson C

1

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 4

Hello Femi, Thanks for reaching out! Both the Demco Autoslide #DM39SV and #DM29GV are excellent choices for your 2026 GMC Sierra 3500 with the factory prep package, and both are compatible with your Grand Design Reflection 150 Series. The biggest…

view full answer...

Answer 5

Hi Tharen! With the TorkLift StableLoad Suspension Upgrade for Upper Overload Springs #TLA7200 installed on your unloaded 2026 Chevy Silverado 3500 (congrats on the new truck!!!), it will make the ride harsher, unfortunately. Upper overload springs…

view full answer...

Answer 6

Hey Joe, we have just what you are looking for with the Roadactive Suspension Kit part #RAS3611-CHD. This will give you the additional suspension support you are looking for without hurting your unloaded ride quality. This will actually improve ride…

view full answer...

Answer 7

It sure can Larry. The Mach-C Everest Variable Speed RV Air Conditioner System item #CM35MR includes an air distribution box that can be used for a top down set up. There's a baffle built into the air distribution box that can be removed to push…

view full answer...

Answer 8

Hey Russel, so fifth wheel pin weight is generally between 15 and 25 percent of the total weight of the trailer as it sits ready to tow. This is different than the GVWR that you mentioned as that number is the total amount the trailer can weigh at…

view full answer...

Answer 9

Hello Nathan, Welcome to etrailer! I'm glad you found us. For your setup, I recommend the Air Lift LoadLifter 5000 Air Helper Springs #AL57341. I actually like this system a little better than the Air Lift LoadLifter 5000 Ultimate Air Helper…

view full answer...

Answer 10

Yes, they are Martin and thanks for the picture. You will need a locking plate to use a Demco Autoslide 5th Wheel Hitch like item #DM8550024 with a Curt Helux pin box. The correct one is the Demco Autoslide Locking Plate for Lippert Helux Pin Boxes…

view full answer...

Answer 11

The steps are approximately 19.415" in width for the MORryde Flip Tread RV Steps #MR42UR. To get wider steps you would need to size up in mounting width to something like the #MR28RR, but would need to have enough room for the steps to properly…

view full answer...

Answer 12

Hey Eddie, we have the Curt offset hitch ball part #C68ZV that fits the OEM pucks of your 2026 GMC Sierra 3500 and has a 4 inch offset like you are wanting. Or we have a cushioned version with the part #C78ZV which has a Rockerball hitch ball on it.…

view full answer...

Can the BOLT Hitch Locks Be Reprogrammed to a New Vehicle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching