How to Choose a Replacement Dexter Hub/Drum Assembly
Updated 12/29/2015 | Published 12/27/2015
Products Featured in This Question
Question:
i need a hub drum kit for my trailer but do not see it listed with you guys. the Dexter number is K08-219-9C. the hub kit without drum is listed as K08-231-9B. Do you guys have either or both?
asked by: Joe B
Expert Reply:
Dexter hub drum assembly # 8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs.
You can also identify compatible replacement hub/drums for your trailer by matching up a few characteristics from your existing set up. You'll need to match up the bearings used, the hub's bolt pattern and your axle weight rating.
The linked photo shows the usual appearance of bearing part numbers. If you cannot get those part numbers you'll need to measure your spindles at the two points noted in the photo (the points where the bearings ride). The easiest way is to find the original bearing numbers. You'll also want to note your hub's bolt pattern. The linked article will be helpful if you are unsure. Last, you'll want to check the sticker or plate on your axle to confirm it's weight rating.
You can then use the linked page to match up your bolt pattern, bearing set and axle capacity to find suitable replacement hub/drums. Just click on the features you need. For example, if your axle is rated for 3500-lbs, you need a 5-on-4-1/2-inch bolt pattern hub with inner bearing # L68149 and outer bearing # L44649, then you can use part # 84546UC3.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: curt 51146
- Search Results: trailer door hinges
- Search Results: hm38134
- Shop: Curt TriFlex NEXT Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: dexter trailer hubs and drums
- Search Results: axle jack
- Search Results: 8~389
- Search Results: 40950
- Video: The Low-Down on the Butt Hinge w/ Non-Removable Pin
- Shop: Brake Controller
- Shop: Butt Hinge w/ Non-Removable Pin - 6" Long x 6" Wide - 3/8" Pin Diameter - Steel
- Shop: Steel Spoke Trailer Wheel - 14" x 6" Rim - 5 on 4-1/2 - Galvanized Finish
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - Black Powder Coat
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 6 on 5-1/2
- Shop: Lift Assist
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Curt Wiring Harness with 4-Pole Flat Trailer Connector - Trailer End - 48" Long
- Shop: Trailer Hitch
- Video: Hands-On with the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: All You Need to Know About the Dexter Nev-R-Adjust Electric Trailer Brakes
- Video: Dexter Hydraulic Brake Kit Review
- Q&A: Meaning of MTI Number On Dexter Hub and Drum Assembly
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Q&A: Where To Find The Factory Brake Controller Wire Harness In A 2023 Ford F-150
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-300
- Video: What to Know About the Dexter Trailer Hub and Drum Assembly
- Q&A: Looking For New Brakes And Hubs For Trailer With Hub Number 8-201
- Shop: Fifth Wheel Hitch
- Q&A: Dexter Hub Replacement for Hub Part # K08-219-9B
- Q&A: New Brakes and Hubs for Old Holiday Rambler Trailer With 7,000 lb Axles
on Trailer Hubs and Drums
