Thread Size and Type for Replacement Stand-Off or Insert Nut for Stromberg Carlson RV Ladder

Question

Question:

Is this item a threaded nut? If yes, what size and thread type?

asked by: Larry

0

Expert Reply:

I went out to the warehouse and pulled Replacement Stand-Off or Insert Nut # FST-9975 to measure it. The inner diameter is 0.209 inches (5.32mm). The thread depth is approximately 1/4 inch and there are 5 threads so that would be 20 threads per inch. It is a coarse thread.

expert reply by: Michael H

0

Answer 1

Yes, the replacement stand-off/insert nut #FST-9975 fits either exterior RV ladder #LA-401 or the RV bunk ladder #LA-460 or #LA-466 by being inserted into the end of the stand-off.

view full answer...

Answer 2

Hello Richard. The only black ladder standoff we carry is the Replacement Standoff for Stromberg Carlson Exterior RV Ladders #8531-B. This is designed to work only with the Stromberg Carlson exterior RV ladders such as part #LA-401BA. Generally,…

view full answer...

Answer 3

The Replacement Stand-Off Nut #FST-9975 can usually just be inserted into the tube using a screw driver or socket to place it in the tube. If you can't get it all the way in then using a block of wood to tap it further into place is the best…

view full answer...

Answer 4

We may have replacement parts available for you depending on the manufacturer and model of your ladder and AC unit. Stand-off nut #FST-9975 measures 1" x 1" and was designed for use with Stromberg Carlson ladder #LA-401. For a 5"…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Thread Size and Type for Replacement Stand-Off or Insert Nut for Stromberg Carlson RV Ladder

Product Page this Question was Asked From

Continue Researching