Ford Replacement OEM Tow Package Wiring Harness Compatability with 2006 Ford F-150

Updated 06/15/2010 | Published 06/13/2010

Products Featured in This Question

Ford Replacement OEM Tow Package Wiring Harness, 7-Way

(290)

$88.92

Adapter 4-Pole to 7-Pole and 4-Pole

(659)

$61.55

Pollak Circuit Breaker - Cycling/Automatic Reset - 40 Amp - Straight Mount Bracket

(49)

$7.40

Question:

will part #118242 work on my ford 2006 F150 .it has two square fittings on one end and the ford part has one rectangular one and a round one .

asked by: zane

Expert Reply:

The Ford Replacement OEM Tow Package Wiring Harness, 7-Way, item # 118242, fits the following vehicles.

2000 - 2003 Ford F-150 Stepside Models
1997 - 1999 Ford F-150 and F-250 Light Duty Stepside Models
2004 - 2004 Ford F-150 Heritage Series Stepside Models
2000 - 2003 Ford F-150 Styleside Models
1997 - 1999 Ford F-150 and F-250 Light Duty Styleside Models
2004 - 2004 Ford F-150 Heritage Series Styleside Models
2000 - 2003 Ford F-150 with factory 4-Flat
1997 - 1999 Ford F-150 and F-250 Light Duty with factory 4-Flat
2004 - 2004 Ford F-150 Heritage Series with factory 4-Flat

It will not work on the 2006 Model Ford F-150. If you would like to give me some more information about the wiring on your vehicle I will be glad to let you know what parts are needed to install a 7-Way connector on your truck.

If you have a 4-Way connector at the rear of your truck, you could use an adapter like part # 37185. To install the adapter, you would first plug it into your 4-Way connector. Then, you would connect the additional wires as follows.

White: Ground wire, connected to a suitable metal grounding point on the vehicle frame.
Blue: Electric brake wire, connected to the electric brake wire coming from the back side of an electric brake controller, if present.
Black: 12v power wire, connected to the vehicle positive battery terminal with a 40amp circuit breaker, part # PK54540 if needed.
Purple: Reverse light wire, connected to the vehicle reverse light wire behind the tail light assembly, if needed, to power reverse lights on the trailer. This wire can also be used to power a reverse lockout function, or as an auxiliary 12v power source. Alternatively, it can be tied up if not needed.