Troubleshooting Running Light Circuit Not Functioning on a 2003 Dodge Ram Trailer Wiring
Updated 08/17/2015 | Published 08/16/2015
Products Featured in This Question
Question:
Dodge Ram 1500 2003 Question no.1: It has a 4 pole flat female connector at rear for trailer lighting hookup. All lights brake, signal left and right are working EXCEPT the running light. Whats wrong? Question no.2: Would the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector of etrailer fix it? Please let me know so I can put in an order. Thanks for your help.
asked by: Dc
Expert Reply:
First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached.
If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue.
Make sure that the trailer side connector are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces. The light grounds should also be attached to clean and corrosion free bare metal surfaces. If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
If the problem is on the vehicle side then I would first recommend you double check how the harness is installed on your vehicle, make sure all of the connections are good and tight. You should check all towing related fuses and relays as well.
If the wiring on your vehicle is bad you could just go with the part # C55504 to bypass the factory wiring and have a new 4-way connector.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Can Demco 8705001 Hydraulic Disc Brake Actuating Trailer Coupler Be Welded
- Video: Review of TowSmart Custom Fit Vehicle Wiring - Trailer Hitch Wiring - TS37QR
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C55504 Review
- Shop: Brake Controller
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: TowSmart Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors
- Shop: CURT Dodge OEM Harness Adapter
- Q&A: Using Demco DA70 Actuator For Drum Brakes With Disc Brakes
- Video: Detailed Breakdown of the Curt Trailer Connector Adapter with Backup Alarm
- Video: Curt Discovery NEXT Trailer Brake Controller w/ Custom Harness: The Breakdown
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How To Bleed Brakes With Demco Hydraulic Brake Actuator
- Shop: Suspension Enhancement
- Video: Review of the Ark Xtreme Off-Road Ratcheting Jack w/ Wheel
- Video: Bleeding Brakes Demonstration
- Video: Review of Demco Brake Actuator - Master Cylinder Repair Kit - DM24ZR
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: trailer wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer tires and wheels
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Custom Fit Vehicle Wiring
