Curt Anti-Rattle Hitch Clamp for 2" Hitches Review Video

Hey Nancy, yes the Swagman Swivel Hitch Extender #S86SR that you referenced will fit a Jeep Wrangler with a 33 inch spare as it has a low enough profile to not interfere with the spare. Are you wanting to use this with a bike rack?

Hey Solomon. You can indeed get a replacement hitch pin lock for your Kuat NV 2.0 Bike Rack item #NV22B but you'll need to replace the other two lock cores to have all three of the keys match. I do not have a way to get you a hitch pin lock that…

We have the Yakima StraightShot Hitch Extension, #Y69VR and the RockyMounts Hitch Extender, #RKY10008, among others. The problem however is that most manufacturers state these type products are not to be used with accessories on RV hitches. The…

Yes the TireMinder i10 TPMS for RVs and Trailers w/ Signal Booster #TM38FR will work great on rubber valve stems. It is designed to work on rubber, steel, chrome, or nickel valve stems.

Hello Edward, Yes, the Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV #RP26003 will work with the Cushioned Ball Mount for 2" Hitches - 4-3/4" Rise - 6" Drop - 10,000 lbs #AMSC6. And don't forget the Reese…

For a high low adapter with a 4 inch drop you could use the part #C59KR and then you could use the hitch lock part #e99047 that you referenced as well.

We do have a potential option for you, but the Curt Anti-Rattle Hitch Clamp #C87UR is likely not going to work with your setup. I think you are exactly right in that there is really no room between the receiver and the hitch. So there is really…

Ball mount rise, or drop, is determined by inserting the ball mount into the hitch on your vehicle and measuring from the top of the hitch opening to the top of the ball mount platform. I added a photo showing how the rise and length would be…

The distance from the center of the hitch pin hole to the gusset welded onto the Curt #C45311 is 4 inches, as shown in the provided photo. If you're wanting something with a longer shank for additional clearance, I'd recommend the Curt…

Hey Gary, thanks for reaching out. When using the etrailer Anti-Rattle Hitch Collar #e38FV, you will want to check the wing nut every time you tow. Anytime you change accessories, or load/unload you will want to check and make sure it is tight. As…

For a 2023 Kia Telluride you are going to want the etrailer Hitch item #e45ZR. The item #e95ZR hitch does not fit the 2023 model. It fits the 2020 - 2023 Hyundai Palisade. I confirmed this with our manufacturer. I checked with our vendors and there…

Hello Ronald. It sounds like you are on the right track here because the Timbren Suspension Enhancement System - Rear Axle Item #TFRTR350HD is going to be the best choice for your 2024 Ford Transit 350 HD High Roof Passenger Van. These are rated for…