Availability of a Right Hand Version of Wesbar Light 271595

Question

Question:

I have a 1998 Ranger trailer, part 271595 will not work unless you can turn the light over.

asked by: Larry C

0

Expert Reply:

It sounds like maybe you are looking for the right hand version of the part # 271595. For that you would want the part # 271594 as the shape of the lens is opposite of the # 271595.

expert reply by: Jameson C

0

Answer 1

The Wesbar 271594 is a sealed light which means the lens is not replaceable. The only solution is to replace the entire light. The parent company for Wesbar recently changed, so as of May 2023 this particular light is on indefinite backorder. I…

view full answer...

Answer 2

Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…

view full answer...

Answer 3

Hey Jeff, we do have some good replacement options for you. The Wraparound LED Tail Light 271594 has unfortunately been discontinued. Our best option for replacing it is the ONE LED Trailer Tail Light #STL0066RBG for the passenger side and…

view full answer...

Answer 4

Hello John, thanks for reaching out. Yes, the mounting holes on the TecNiq Contoured Seven Function Box Style Tail Light #TN42XR (driver side) and #TN62XR (passenger side) are exactly the same as the Wesbar 271595 tail light. They are 2" apart…

view full answer...

Answer 5

Hi Jim! The Wesbar Wrap Around Lenses were discontinued quite a while ago, so unfortunately, we do not have any left in stock. I did a lot of searching around the web, but I was unable to find anywhere that still carries them. You may be able to find…

view full answer...

Answer 6

The Fulton Bolt-Thru Swivel Marine Jack #FXP10 fits 3 x 5-inch trailer frames and comes with a bracket that we know matches the Ranger Trail swivel jacks like you have. I have attached a photo that shows the mounting bracket and the measurements…

view full answer...

Answer 7

What you have there is a Dutton Lainson jack. There is no longer a direct replacement jack, but you can use the #DL22580 which will be an upgrade. This is a swivel jack with a 1,500 lb capacity and 12" of lift. This has dual wheels for easy…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Availability of a Right Hand Version of Wesbar Light 271595

Featured Help Information

Miscellaneous Media

Continue Researching