Parts Needed To Install 7-way Trailer Connector on 2000 Toyota Tundra
Updated 07/11/2015 | Published 07/09/2015
Products Featured in This Question
Question:
Will the hm 43385 harness fit my 2000 toytoa tundra
asked by: Jim
Expert Reply:
We do have a solution that would allow you to install a 7-way trailer connector on your Tundra, but the # HM43385 7-way connector wasn't a fit for the Tundra until the 2003 model year.
To install the 7-way, you'll need functional 4-pole connector. If you don't have one, you can install one using part # 118367.
How you proceed from here will depend on whether or not your trailer has brakes. If it does not, you can simply use an adapter like part # 37185. Plug the adapter into the 4-pole and ground the white wire on the adapter. The rest of the wires aren't necessary, you can just bundle them up out of the way.
If your trailer does have brakes, you'll need to install a brake controller like the Tekonsha Primus, part # TK90160. You'd also need our Brake Controller Install Kit, part # ETBC7. The kit includes the adapter mentioned above, as well as all the wire, circuit breakers and hardware you'll need to complete the installation. I'll link you to the instructions for the install kit, as well as to a video showing the kit being used to install a brake controller on a 2002 Tundra. The procedure shown in the video would be identical for your truck.
I've also linked to some FAQ articles that you might find helpful.
Product Page this Question was Asked From
7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Blade
- Plug Only
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Is Drilling Required For Installation Of Roadmaster Front Anti-Sway Bar on 2026 Jayco Melbourne 24L
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2025 Kia Sportage PHEV
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: Will Dexter 7K Tow Assist ABS Brake Assemblies Fit Lippert 7K Axles With ABS?
- Q&A: Availability of Victron DC/DC Battery Charger With Lithium Compatibility and Engine On Detection