Amount of Lift Provided by Fulton 1200 lb Capacity Marine Jack # FXP100W0301

Question

Question:

Can you tell me the lift on item Code: FXP100W0301

asked by: Jon M

0

Expert Reply:

The Fulton Marine Jack you referenced, part # FXP100W0301 has a lift of 10 inches. The bracket height is 14-3/4 when the jack's extended and 10-1/2 when it's retracted.

The weld-on bracket is sold separately as part # P9012-00.

expert reply by: Mike L

0

Answer 1

The trailer jacks we offer that are similar to the #FTJ120W0301 you came from all use a mounting plate that has different dimensions than what you said your trailer jack plate has. You can remove the welded mounting plate on your trailer and have a…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Greg, thanks for the picture of your jack! From that I can tell pretty easily that what you need is the Fulton Boat Trailer Jack part #FXP100W0301.

view full answer...

Answer 6

Hey Steve, it sounds like you are looking for the Fulton Boat Trailer Jack part #FXP100W0301 which utilizes the style of swivel bracket that it sounds like you have. The pull pin diameter though is 1/2 inch which is the same size for all of these…

view full answer...

Answer 7

What you've got there looks like some type of proprietary mount that we don't offer. We do however have jacks that would work. I'd recommend having the mount removed and using a weld-on jack like the Fulton #FXP100W0301 and the #P9012-00…

view full answer...

Answer 8

The correct replacement for the Fulton Magnum Series Trailer Jack on your trailer is the Fulton Bolt-Thru Swivel Marine Jack part #FXP10W0301 if you have a bolt-thru mounting bracket or part #FTJ120W0301 if you have a snap-ring mounting bracket. I…

view full answer...

Answer 9

It sounds like you are actually needing the Replacement Hardware Kit for Fulton Swivel Jacks #F0933325S00.This fits a mounting plate like the #P9012-00 that it sounds like you have welded to your trailer. It includes the metal bushing/washer that you…

view full answer...

Answer 10

Hello John, thanks for reaching out. The Westlake tires are made in China. This is the case for virtually all trailer tires. At this time, Goodyear is the only trailer tire manufacturer that still makes all of their tires here in the USA. Was there a…

view full answer...

Answer 11

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Amount of Lift Provided by Fulton 1200 lb Capacity Marine Jack # FXP100W0301

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching