bing tracking image
  1. Trailer Jack
  2. Fulton
  3. Boat Trailer Jack
  4. Side Frame Mount Jack
  5. 1001 - 2000 lbs
  6. Sidewind Jack
Fulton Marine Jack - Weld On - Sidewind - 1,200 lbs

Fulton Marine Jack - Weld On - Sidewind - 1,200 lbs

lowest price pledge
Retail:$120.89
Our Price: $94.08
You Save: 22%
Trailer Jack
Orders above $99 qualify for Free Shipping
Shipping Weight: 14 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Lowest Prices for the best trailer jack from Fulton. Fulton Marine Jack - Weld On - Sidewind - 1,200 lbs part number FXP100W0301 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (506)
  • Q & A (0)
  • Photos
  • Why etrailer?

Fulton Trailer Jack

  • Boat Trailer Jack
  • Side Frame Mount Jack
  • 1001 - 2000 lbs
  • Sidewind Jack
  • No Drop Leg
  • Weld-On
  • Swivel Jack - Pull Pin
  • 10 Inch Lift
  • With Wheel
  • Fulton


Features:

  • Ideal for marine and recreational use
  • Convenient, spring-loaded, plunger-pin swivel feature
    • Swing up to stow parallel to tongue for travel
    • Move back into upright position for use
  • Z-Max 600 zinc finish provides superior corrosion resistance
    • 600-Hour salt spray rating
  • Heavy-gauge steel construction
  • Weld-on bracket (P9012-00) sold separately
  • Torsion axle design
  • Sidewind design
  • Thermoplastic wheel included


Specs:

  • Bracket height:
    • 14-3/4" Retracted
    • 24-3/4" Extended
  • Lift: 10"
  • Clearance: 10-1/2" from mounting bracket to top of jack
  • Tubing diameter: 2"
  • Pull pin diameter: 1/2"
  • Wheel diameter: 8"
  • Lift capacity: 1,200 lbs
  • 5-Year limited warranty


XP100W0301 Fulton Marine and Recreational Weld-On Swivel Jack - 1,200 lbs

Item # FXP100W0301

Installation Details FXP100W0301 Installation instructions


California residents: click here



Customer Reviews

Fulton Marine Jack - Weld On - Sidewind - 1,200 lbs - FXP100W0301

Average Customer Rating:  4.9 out of 5 stars   (505 Customer Reviews)


- FXP100W0301
by:

Good product. Stout enough to handle my boat trailer with the boat loaded. Cranks up and down easily, pivots and rolls easily on concrete surface. Met my expectations. Good price and fast shipping. Be sure to order the mounting bracket.


Comments
Does what it is designed to do. 25 or so launches per year. No glitches.
Ralph - 01/27/2022


- FXP100W0301
by:

I received my jack very quickly. It was exactly as described and I am very pleased with this purchase. I will not hesitate to return to etrailer.com for future purchases.



- FXP100W0301
by:

Doing a very good job



- FXP100W0301
by:

Fantastic jack. Perfect replacement fit. Love it. Thanks etrailer.com for you awesomeness.


Comments
Jack still performs like new after a year. Definitely recommend it
Keith - 12/08/2018



- FXP100W0301
by:

Replaced a broken jack on my Boatmate trailer. Great price and perfect fit



- FXP100W0301
by:

The Product is the product It is a high quality boat jack made from quality materials and preforms will. This the second time i have done business with etrailer.com. They a great web site and if you call them they are more than helpful. Their costumer service is outstanding I just have to stop driving down the road with jack down:(



- FXP100W0301
by:

I went to many places online and at stores bought two different jacks that had to return, a real pain in the butt. Once I found etrailer I found what I was looking for. Then I called them, talk to one their sales rep on the phone to verify that this was the part I needed. In three days I had what I was looking for. Bottom line is etrailer has a knowledgeable staff. They are moderately priced and deliver is fast. I enjoyed doing business with etrailer.



- FXP100W0301
by:

Jack arrived promptly with all the necessary hardware and instructions. After one year, the jack continues to work as it should and hold up to regular use. I am on the water 70-80 times a year. Very satisfied.



- FXP100W0301
by:

Hold time on phone was ridiculous. Over 30 minutes. After that it was good. Yes



- FXP100W0301
by:

Arrived quickly and was a direct match. Bolted on 10 min after arrival. Very happy!



- FXP100W0301
by:

Nice product, but it should come with the bracket, or tell you that you should buy the bracket with it so you don't have to pay seperate shipping and wait another 3 days for it to get here



- FXP100W0301
by:

Excellent service, the part are excellent condition very new with excellent packaging.


Comments
Work very well
Jose - 07/20/2020


- FXP100W0301
by:

Fast shipping and excellent service



- FXP100W0301
by:

Product is as described and worked perfectly. Received the item 3 days after ordering. Excellent customer service.



- FXP100W0301
by:

Bolted right on delivered in 3 days great seller AAA



- FXP100W0301
by:



- FXP100W0301
by:

easy to install works as it should. fast service



- FXP100W0301
by:



- FXP15
by:

Review from a similar Swivel Marine Jack in Trailer Jack


The product seems good quality however the Shipping was not so good. The box that the Fulton Marine Jack came was ripped apart by the freight company during shipping. Not happy with the way it came in.


Comments
I will have our customer service team reach out to you.
-- Etrailer Expert Jenny N - 02/07/2022


- FXPD15L
by:

Review from a similar Swivel Marine Jack in Trailer Jack


Bolted up to my trailer easily. Had all the brackets and hardware needed in the box. The extra wheel allows my trailer to be moved more easily across my uneven concrete pad.



- FXPD15L
by:

Review from a similar Swivel Marine Jack in Trailer Jack


Great jack, my heavy boat can be moved easily now with the dual tires.. It was damaged during shipping and etrailer had me fixed up very quickly!



- FXP10
by:

Review from a similar Swivel Marine Jack in Trailer Jack


Mounts easy and works great.. ( you might look at using better carton or overboxing for online shipping. The box was destroyed and had to be taped up. Fortunately no parts were missing!)



- FXP10W0301
by:

Review from a similar Swivel Marine Jack in Trailer Jack


The product was as advertised but the customer service at etrailer is exceptional. The product was delivered in the quick timeframe they said it would be and the order was complete. Thanks etrailer. I’ll be back.



- FXP10
by:

Review from a similar Swivel Marine Jack in Trailer Jack


Ordered this wheel kit on Saturday was shipped within a couple hours, excellent place to buy from.


Comments
Excellent fit , perfect replacement.
Todd - 04/29/2022


- F77CR
by:

Review from a similar Swivel Marine Jack in Trailer Jack


received my Fulton trailer jack yesterday and installed in about 10 mins Exactly what I ordered and was impressed with the quality


26
508
Show More Reviews

Ask the Experts about this Fulton Trailer Jack



  • Recommended Replacement Fulton Trailer Jack For An Older FXP100W0301 Fulton Jack
    I have a replacement jack option for you, but after reaching out to my contact at Fulton the plate you showed in your picture is not offered as a replacement part. Your only option at this point is to go ahead and replace your jack with the Fulton Marine Jack - Weld On - Sidewind - 1,200 lbs # FXP100W0301 which will be an exact replacement as it is the same jack you currently have.
    view full answer...
    Image 1 for
  • Replacement Trailer Jack Recommendation for Boat Trailer with Weld On Mount
    Based on the picture you submitted the Fulton Marine Jack part # FXP100W0301 that you referenced would be exactly what you'd need and would bolt right up to the mount you have on the trailer frame.
    view full answer...
    Image 1 for
  • Recommended Fulton Bolt-Thru Swivel Jack Replacement for 2003 Cobalt Boat Trailer
    The jack I recommend to replace your Fulton 1000 lb jack with bolt through is the Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs # FXP15W. This is a very sturdy jack that will give you a little added safety as you mentioned and will function in the same way as jack you are replacing did when new. This swivel jack is 22-3/4 inches when fully extended. This jack uses an 8 pitch acme screw for easy lifting and comes with an 8 inch diameter thermoplastic...
    view full answer...
  • Replacement for Fulton Swivel Trailer Jack with Center Bolt
    It looks like you have a Bolt-Thru style Fulton Swivel Marine Jack therefore the correct replacement for you would be part # FXP10 which has a 1,200 lb weight capacity. This jack would then use the same mounting bracket you have now but it does come with an extra bolt-on bracket if needed.
    view full answer...
    Image 1 for
  • Is There a Bolt-On Replacement for Old Shelby Weld-On Trailer Jack
    I do have an option for you but if it's an old Shelby Trailer Jack with welded-on bracket then you'll be better off removing the jack, leaving the welded-on bracket in place, and attaching a bolt-on jack like the Fulton Bolt-Thru Swivel Marine Jack part # FXP15. Shelby Jacks are discontinued and there are no longer any direct bolt-on replacements for their brackets that I am aware of.
    view full answer...
  • Magnum Series Jack Replacement For Boat Trailer
    Thanks for the picture of your trailer jack! Based on that all you need is the part # FXP100W0301 which will easily attach to the welded on bracket you have on your trailer frame.
    view full answer...
    Image 1 for
  • Options to Replace Shelby 5764A Trailer Jack
    Thank you for that info, and while we have some options for you to replace your Shelby 5764A trailer jack, there isn't one that is going to fit that bolt pattern. So you have a couple of things you can do, which is either have a new plate welded on, or use a bolt-on jack but in a different location on the frame that won't interfere with where the current weld-on plate is now, if possible. If it is not, then you'd have to have the current weld-on plate removed. So long as your trailer...
    view full answer...
  • How To Replace Welded-On Trailer Tongue Jack for Boat Trailer
    In order to remove a welded-on trailer tongue jack you will need to cut off the old welds to release the mounting bracket. This can be done using an angle grinder. The jack can then be replaced with another welded-on option such as the Fulton Marine Jack part # FXP100W0301. If you don't have an angle grinder or the skills to use one you can always leave the mounting bracket attached and just install a bolt-on jack in front or behind it, I recommend the Round Swivel Marine Jack part # MJ-1200B.
    view full answer...
  • Can I Use a Bolt On Trailer Jack to Replace a Weld On Jack?
    If you wanted to use the Fulton # FXPD15L jack in place of your old welded on unit, you would first need to cut the old weld on bracket off of your trailer. Once you've done that, you can switch to a bolt on style trailer jack. You won't be able to just mount it into the existing place though without removing the old bracket. If that's not an option for you, let me know and send in a photo of the mounting bracket; I'm happy to see if we've got a weld-on jack that would be a suitable replacement...
    view full answer...
  • Amount of Lift Provided by Fulton 1200 lb Capacity Marine Jack # FXP100W0301
    The Fulton Marine Jack you referenced, part # FXP100W0301 has a lift of 10 inches. The bracket height is 14-3/4 when the jack's extended and 10-1/2 when it's retracted. The weld-on bracket is sold separately as part # P9012-00.
    view full answer...
  • Fulton Jack Recommendation for Triton Dual Axle Boat Trailer with Weld On Fulton Jack
    Sounds like you'd need a Fulton jack like the part # FXP100W0301 which is a weld on style jack like what you have that would attach to a bracket like part # P9012-00 that you'd have installed on your trailer most likely. You can send me pictures if you like and I'll take a look and see if there's something else that would work better. Sticking with a Fulton jack though will allow you to reuse the bracket you have installed instead of having to remove what you have and install a new one.
    view full answer...
    Image 1 for
  • Correct Replacement Bevel Gear Set for Fulton Swivel Jacks
    It looks like you have a variation of the Fulton Marine Jack # FXP100W0301. For that the replacement bevel gear kit is part # F0933302S00 and work with Fulton marine and recreational jacks up to 800 lb to 1,200lb capacities. As long as your jack falls under this category you are good to go!
    view full answer...
    Image 1 for
  • Availability of Trailer Jack to Fit with Flat Weld-On Bracket from Shelby Jack
    I recently had someone else with this same situation and when I reached out to Fulton my contact said that the Shelby connection just isn't used any more so to replace your jack you can use the Fulton Marine Jack # FXP100W0301 that you referenced, and then have the Mounting Bracket # P9012-00 welded on to complete the install.
    view full answer...
  • Replacement Handle Recommendation for a Fulton XP 100 Jack
    For your Fulton XP 100 jack the correct replacement handle is the part # F0933301S00.
    view full answer...
  • Replacement Jack for 1996 Mastercraft Prostar 190 Trailer
    While we do have replacement jacks that will work for your 1996 Mastercraft Prostar 190 trailer, there are none that are going to be a direct bolt-on replacement for the bracket you currently have on. So what you will need to do is either use a bolt-on jack or have a new mount welded on, the Jack Mounting Bracket for Fulton Marine Jack # P9012-00. With this new bracket you could then use the outstanding Fulton Bolt-Thru Swivel Marine Jack # FXP15W, which gives you 10 inches of lift, or...
    view full answer...
  • Replacement Side Frame Mount Jack for Pop-Up Camper
    That's an interesting jack, and there are no specific replacements for it so what you are going to need to do is have your mounting bracket removed and new one welded on. For this I recommend the Jack Mounting Bracket # P9012-00 with Fulton Marine Jack # FXP100W0301. It says "marine jack" but that just refers to its coating to reduce corrosion so it will work on your pop-up trailer.
    view full answer...
    Image 1 for
  • Replacement Trailer Jack for Viking Legend Pop-Up Camper
    What you've got there looks like some type of proprietary mount that we don't offer. We do however have jacks that would work. I'd recommend having the mount removed and using a weld-on jack like the Fulton # FXP100W0301 and the # P9012-00 bracket. This is a swivel jack, so when the pop-up is hitched to the tow vehicle, pull the pin and swing up the jack so it stores parallel to the trailer frame. This prevents the caster from hitting anything while towing and getting damaged, which from...
    view full answer...
    Image 1 for
  • Could Fulton Marine Jack FXP100W0301 Fit Trailer Mount
    If the holes on your mount are separated by 3 inches the Fulton trailer jack # FXP100W0301 will fit. If you need a new mount you'd need the # P9012-00. For new hardware for the bracket you'd need the # F0933325S00.
    view full answer...
    Image 1 for
  • Replacement for Fulton Magnum Compatible With Existing Welded-On Bracket
    The Fulton Magnum jack used the # P9012-00 weld-on bracket which would be compatible with the bracket included with the 1200 lb Fulton Jack, part # FXP100W0301 or the 1500 lb model, part # F1411300301. If your attachment bolt that attaches the jack to the mount on the bolt is worn, you might want to replace that as well. We offer the replacement nut, bolt and bushing as part # F0933325S00.
    view full answer...
  • Replacement Trailer Jack for a 2004 Lund Boat Trailer
    From what I could find on the Lund boat trailers, it seems like you may be talking about the jack being attached to the Jack Mounting Bracket like the # P9012-00 (which would be welded on), this would work with the Fulton Marine Jack # FXP100W0301 (12,000 lbs.) or the Fulton Bolt-Thru Swivel Marine Jack # F1411300301 (15,000 lbs.). Without knowing what jack you have for sure, I would not be able to recommend a rebuild kit. If you have the manufacturer and model number of the jack or can...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.