Replacement Hubs and Spindles for a Tow Dolly
Updated 05/28/2015 | Published 05/26/2015 >
Question:
I have a Stehl tow dolly that I use to haul my Tahoe behind my motorhome. With only about 4000 miles the bearings failed. Do you have better quality bearings and spindles so that I can rebuild the side that failed and replace the bearings on the other side? Also do you sell the hub and spindle replacements? Thanks,
asked by: Scott C
Expert Reply:
We do sell hubs and spindles here that you could use on your tow dolly. Now to pick out the best ones to use you will need to know the weight capacity of tow dolly so that we can pick out the correct hubs/brake assemblies/spindles that would be properly rated for the tow dolly.
I am assuming you have electric drum brakes on the dolly as well.
Once you know what weight capacity axle the tow dolly has you can follow the link I attached to see all of the brake assemblies we have. You would need to select the capacity you need from the filters on the page and all of the correct assemblies will be listed. Once you know what size assemblies you need you will be able to pick out the correct hubs to fit them, and then finally you will be able to pick out the correct spindle.
Email me back with the info on the weight capacity and I can walk you through the process.
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Flush Valve for a Thetford 42072 Toilet
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: Kodiak 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: brake hub assembly
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Spindle for Tow Dolly
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer wiring
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Brake Controller
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer leaf springs
- Shop: Gooseneck Hitch

