Replacement Taillight Lens Recommendation for Stratos Boat Trailer Passenger Side Tail Light

Question

Question:

Please advise which tail light lens I need for the passenger side of my 2012 Stratos boat trailer. The info on the lens is as follows... Optronics SAE STIAP 2 04 DOT

asked by: Erik A

0

Expert Reply:

I believe I have a solution for you, but the SAE number you listed isn't a reliable way to get a replacement lens. Based on the picture you submitted (thank you for that by the way), it looks like you are in need of a part # A39RB.

This lens measures 7-7/8" L x 3-1/4" W.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Lexie, the closest thing we have is the #BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. The little bit of extra height on your cutout won't be a problem since the face is 5-1/2" tall and would cover the opening.…

view full answer...

Answer 6

Hey John, The Optronics A1STP2 93 compares to the STXXRB line of tail lights so you likely would be able to use the Replacement Tail Light and Side Marker Lens for Optronics Combination Tail Light #A16RB. The mounting holes in the lens are spaced…

view full answer...

Answer 7

Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…

view full answer...

Answer 8

Hey Thomas, the RVIA code is that everything above the belly pan of the RV has to be copper until you reach the appliance. Rubber would be easier though wouldn't it?

view full answer...

Answer 9

The SAE STIAP2 04 DOT number you provided is a DOT approval number, which states that the lens is compliant with DOT regulations. Because of that, that number isn't typically a good identifier for finding a replacement lens. However, in this…

view full answer...

Answer 10

The lights you have on your trailer are #ST37RB and #ST36RB. The replacement lenses are #A39RB for the front lens and #A37RB for the side marker.

view full answer...

Answer 11

Thanks for reaching out! You are correct that the SAE number isn't the part number for the trailer light. It stands for Society of Automotive Engineers and is just a way of showing that the light manufacturer completed the required testing for…

view full answer...

Replacement Taillight Lens Recommendation for Stratos Boat Trailer Passenger Side Tail Light

Product Page this Question was Asked From

Continue Researching