How to Pick Out a Replacement Hub for a AL-KO T60 Axle

Question:

Looking for Trailer Hub/Drum and Brake kits for AL-KO T60 Axles 6000# MFG 2009, 5.5 on 6. Do you have a cross-reference?

asked by: Wes

Expert Reply:

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information.

First thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs with your 6 on 5-1/2 inch bolt pattern.

You would want to select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C