Replacement Hub/Drum for AL KO 7,200 lb Trailer Axle

Question

Question:

I have a used travel trailer that i am redoing. It has hub and brake assembly stamped AL KO 7200. Can this assembly be put on a Dexter axle with a four inch ? If so what do you recommend?

asked by: EDWARD J

0

Expert Reply:

I did some digging on your AL KO 7,200 lb axle and it has bearings # 28580 and # 25580 which means you have a 99 spindle. The only hub we offer that will fit this setup is the part # 99865UC3 which is a similar Titan hub but has an 8 on 6-1/2 inch bolt pattern instead. This would fit on a Dexter axle.

expert reply by: Jameson C

0

Art

5/28/2025

Hi Jameson, Im in the need of replacing my drum hub 99865UC3, do you have a replacement

Jameson C.

5/28/2025

@Art I wish we could help but we can't get that hub any longer and we don't have any similar replacements that use same bearings either.

Charles B.

1/10/2026

I need new hub studs for my AL-KO 7200, 6 lug hubs. I can't find them locally. I'm a bit unsure of the size?

Jameson C.

1/12/2026

@CharlesB It's probably going to be 9/16 inch in diameter but you should still measure to be sure. And if you can get me the length of them that extends past the hub face I can see what you would need.

Answer 1

The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…

view full answer...

Answer 2

That certainly looks like an Al Ko 7,200 lb axle hub/drum. With that in mind you should check the plate on the trailer that has the VIN as well as that will tell you the trailer's overall capacities as well.

view full answer...

Answer 3

The correct replacement braking assemblies for your trailer with an AL-KO 7,200 lb axle is the Electric Trailer Brake Kit part #AKEBRK-7-SA for self adjust or part #AKEBRK-6 for manual adjust. The self adjust brakes as the name states will…

view full answer...

Answer 4

From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the same…

view full answer...

Answer 5

Hey Joshua, thanks for reaching out! If you're looking for a simple plug and play replacement then the Furrion Chill HE #FR32PV is a great option, but if you're looking for an upgraded kit then I believe what you're looking for is the…

view full answer...

Answer 6

I have a few options for you to help with identifying the hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find…

view full answer...

Answer 7

The closest option we have would be the part #BB60001 which has an inner diameter of 1.375 inches and an outer diameter of 1.980 inches.

view full answer...

Answer 8

We have the exact bearing part #25580 that you are looking for. The inner diameter is 1.75 inch like you said you'd need too.

view full answer...

Answer 9

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

view full answer...

Answer 10

Hey Mike, yes because both hubs are for 3,500 lb axles. That said we don't carry the 8-247 so best option would be the #8-247-50UC3 or any of the other hubs at the attached link on this page.

view full answer...

Answer 11

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. First thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and…

view full answer...

Answer 12

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

view full answer...

Replacement Hub/Drum for AL KO 7,200 lb Trailer Axle

Products Featured in This Question

Continue Researching