bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C11326
Retail:$483.95
Our Price: $282.01
You Save: $201.94
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11326 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (26)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11326

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitches assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11326 Curt Class 1 Trailer Hitch Receiver

Installation Details C11326 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11326

Average Customer Rating:  4.8 out of 5 stars   (26 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:
2010 Saab 9-3

Product shipped when they said it would with the best packaging of any large / heavy product I've ever received.

I went with etrailer.com over the competition because they actually had an installation video that gave me the confidence to handle the installation myself.

Installed the hitch and was out riding my bike the next day.



by:
2004 Saab 9-3

The trailer hitch went on very easy & was used that day . I will definitely be recommending etrailer to anyone wanting to install a trailer hitch on a vehicle.



by:
2008 Saab 9-3

The hitch was easy to install and looks like a custom hitch. I'm very happy with it.



by:
2008 Saab 9-3

Trailer hitch fit fine, however the dimensions for the fascia cutout are off by about 3/8" on the passenger side. The video could give more details about tricks to mount the bolts under the fascia as they were pretty difficult to get in. Otherwise all was good.

John S.

7/11/2018

Hitch has been good, no corrosion from NJ and Vermont winters



by:
2007 Saab 9-3

Well made product, could use better diagrams in installation instruction. Very happy with great fit! Awesome customer service (Anna D.), and helpful installation video from etrailer!! + lowest price, standard shipping took only 3days!

Kang S.

8/11/2019

You guys checking up on the product after a year? Thats an awesome customer service! I am still very happy with the product! I checked on some other products elsewhere online but etrailer has the best price and many helpful videos, too!



by:

The hitch was perfect. My mechanic installed it in less than an hour. I’ve used it mostly for my bikes, but did use a trailer with great results.

Mike T.

8/18/2021

The hitch is still working as good as new. I use it weekly for my bikes.



by:
Saab 9-3 Aero

The trailer hitches I purchased arrived promptly and were of quality construction. Unfortunately, none of the hitches I tried will fit the Saab 93 Aero Sedan due to the dual exhaust system on this vehicle. The Aero has all the correct hitch points (mounting holes and flange on the bumper, and weld nuts in the chassis under the spare tire well, but the weld nut locations on the Aero are an inch closer to the rear bumper than they are on the Sport Combi Wagon with dual exhaust. Regardless, etrailer.com was great in their customer support in trying to find a hitch that would work, and in supplying the return documentation. I would use them again!



by:
2005 Saab 9-3

Product arrived super fast (ordered on Monday, arrived on Wednesday)! Installed over the weekend in 1hr 15 mins (including setup and cleanup). Fit on my 2005 Saab 9-3 sedan perfectly. Hardest part was cutting out the plastic bumper fascia to clear the hitch. Haven't actually used it yet, but it feels solid and I don't have any concerns about its stability. I'm just using it for a hitch-mounted bike rack, so I didn't get into wiring a trailer harness.



by:
2006 Saab 9-3

I haven't installed it yet. I did however, receive it very promptly along with the Thule bike rack. UPS ruffed up the trailer hitch box to the point that both ends where hanging out of the box. The holes were so big I was concerned that the hardware may be missing. To my surprise, the hardware was securely taped to the hitch. I'll be installing today after work. Yes I will do business with this company again.



by:

Install went smoothly, the hitch seems to be made of quality materials and of good design. My only concern is with the stabilization strap required when transporting bicycles, etc.. if this is required, why not include it instead of charging more for it as a separate purchase? Also, the straps I looked at will definitely ruin the paint on the trunk of my car as they vibrate while driving. This isn’t an acceptable solution to the problem, because it will damage my car.



by:
2004 Saab 9-3

Product was delivered timely and in good condition. The only suggestion that I have would be for etrailer to remind purchaser that it doesn't include the drawbar (ball mount) and suggest the options for that purchase. It was easy to get locally so it didn't cause and holdup.



by:

Ordered the hitch on Wednesday afternoon, it was on my door-step by Friday morning and installed by my mechanic by Friday at noon.

Great service, the hitch seems to fit well.



by:

The Curt hitch for my 2004 Saab 9/3 fit well, did not hurt ground clearance, and was a good choice.



by:

Very nice hitch and easy to install. I purchased this for my girlfriends son to take his bike when he moved.



by:
2007 Saab 9-3

The tow hitch for my 2007 Saab 9-3 fit perfect and bolted right on my car. Easy instructions, prompt responses and ship.



by:

Product was as advertised. Installation was easier than first thought. Product performance has been great



by:

Lightning quick shipping. Put on the next day
and was pretty easy, though I recommend watching
the youtube video. There is another facia under
the car that I didn't see on the video, just an FYI-
you may have to remove or cut an access panel trough.
Great product and Thanks for the quick shipping!



by:

Quick delivery, good price and easy ins tallation!



by:
2003 Saab 9-3

PRODUCT, PRICE, SERVICE VERY GOOD



by:
2007 Saab 9-3

been working great, no problems.



by:

Product arrived on time and I had it installed the next day. It looks and works great!



by:
2003 Saab 9-3

Solid product, fast shipping and pretty easy to install. All around good experience.



by:



by:



by:


25
26
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch Receiver to Fit 2008 Saab 9-3 Convertible
    Since your 2008 Saab 9-3 is a convertible and not a SportCombi you'll use the Curt Trailer Hitch Receiver # C11326. I've attached both the instructions as well as an install video to this page for you to take a look at. The install is considered a 7 out of 10 difficulty by Curt so it is more labor intensive than some but it can be performed by someone who has mechanical skills and proper tools. Since you're going to use the hitch to carry a bike rack you'll need to use a support strap...
    view full answer...
  • Trailer Hitch Fit for a 2006 Saab 9-3 Convertible
    The only trailer hitch option for a 2006 Saab 9-3 Convertible is the Curt Trailer Hitch Receiver part # C11326 so long as you don't have the SportCombi package or dual exhaust. If you do have both a convertible with SportCombi package or convertible with dual exhaust then there are no trailer hitch options available unfortunately. The Curt Trailer Hitch Receiver has a 1-1/4" receiver tube opening and is a bolt-on fit with no drilling required. The Curt Trailer Hitch Receiver will work...
    view full answer...
  • Differences Between CURT Hitches # 11415 and # 11326
    I spoke with my contact at CURT and he pointed out to me that the difference between the CURT Hitch # 11415 and # 11326 is the way the plate behind the hitch opening mounts to the bumper beam tab. On the # 11415 the plate on the hitch will go in front of the bumper beam tab, whereas the plate from the # 11326 will install behind the bumper beam tab. Check out the picture I attached that shows both of these hitches next to each other so you can see the differences. I also attached installation...
    view full answer...
  • Trailer Hitch and Wiring for a 2008 Saab 9-3 Convertible
    Trailer hitches are custom designed to fit specific mounting points on a vehicle. If a hitch is not listed as a fit for your 2008 Saab 9-3 then it physically will not fit. Cost of a hitch will vary based on the design of the hitch and the amount of material used to make it. If you can tell me the hitch you are looking at that is similar I can determine how it is different from the hitches that are a fit for your 9-3. Based on the trailer hitches for your 9-3 I can tell you that the attachment...
    view full answer...
  • What Hitch Wiring Do I Need For A 2006 Saab 9-3 2.0T
    For your 2006 Saab 9-3 the DaLan part number 247326 you referenced is the correct part number and is the same as part number 11326 from Curt manufacturing on our site. The wiring does not come with the hitch. Your vehicle will need to be hardwired to provide an electrical trailer connector. I would recommend the # 119179KIT to wire your vehicle so that you have all of the wiring, hardware and inline fuse needed to complete the installation. You will have to use a circuit tester to identify...
    view full answer...
  • Trailer Hitch Recommendation for 2011 Saab 9-3 Sedan with Single Exhaust
    Since your 2011 Saab 9-3 sedan has single exhaust the correct hitch you need is the Curt # C11326. We confirmed this with our contacts at Curt.
    view full answer...
  • Availability of Trailer Hitch for 2003 Saab 9-3 Sedan
    The Curt trailer hitch, part # C11326, is a fit for the convertible model or the sedan model of the 2003 Saab 9-3 as it is not the SportCombi model or a model with the dual exhaust. If you intend to do some light towing you will want the recommended ball mount is # C45521 and the pin and clip is # F-4. For a 1-7/8 inch hitch ball use # A-80. Or for a 2 inch hitch ball use # A-82. For trailer wiring use # C59496. I have included a link to the wiring instructions for you, as well as installation...
    view full answer...
  • Trailer Hitch Recommendation for a 2003 Saab 9-3 Convertible
    The Curt Hitch part # C11326 is listed as a fit for your 2003 Saab 9-3 convertible unless it is the SportCombi model or unless it has dual exhaust. For trailer wiring you would the part # C59496. For a ball mount part # 36053 and then for a 2 inch ball # 19258 or 1-7/8 inch ball # 19256.
    view full answer...
  • Recommended Trailer Hitch and Cargo Carrier for 2007 Saab 9-3 Convertible
    The Curt Trailer Hitch Receiver part # C11326 is the only available trailer hitch for a 2007 Saab 9-3 Convertible so that is what you'll want to use. It does not require any drilling for installation. The 17x46 Curt Cargo Carrier part # C18145 would then be a prefect option for this to carry luggage.
    view full answer...
  • Availability of Trailer Hitch that Fits a 2007 Saab 9.3 Convertible
    Yes, the Curt hitch part # C11326 is a fit for your 2007 Saab 9.3 convertible and would be a great option. It's a Class I hitch with a 1-1/4 inch opening. I attached an install video for the hitch for you to check out as well. The price is available at the product link below.
    view full answer...
  • Trailer Hitch Recommendation for a 2006 Saab 9-3 Convertible
    The CURT Trailer Hitch, # 11326, is designed to fit the 2006 Saab 9-3 convertible and sedan models. CURT Trailer Hitch # 11415 is designed to fit SportCombi models with single exhaust. Since you have a convertible model, you will want to go with the first one, # 11326. I have included a link to the installation instructions for this hitch and a link to a video showing a typical installation for you. The hitch comes with a ball mount, hitch pin, and clip. For a ball, use # 19256 (1-7/8...
    view full answer...
  • Trailer Hitch for a 2011 Saab 9-3 Convertible Turbo with Single Exhaust
    Yes, Curt trailer hitch # C11326 is the correct hitch for a 2011 Saab 9-3 Convertible with single exhaust. Fun fact: for that generation, all of the motor options except 1 were turbos. For a super-sweet 1-7/8 inch Euro style ball mount use # C45571. Or for a 2 inch use # C45572. And for trailer wiring use # C59236. I have included links to the instructions for the hitch and wiring for you.
    view full answer...
  • Hitch and Bike Rack Recommendations for 2007 Saab 9-3 Sedan
    According to our friends at Curt, for the 2007 Saab 9-3 4dr Sedan, you would use the Class I Receiver Hitch part # 11326. The # C11140 hitch will only fit the SportCombi (wagon) models. If you will be occasionally transporting your bikes for short distances, the Rhode Gear # RG8015220 rack would be a fine choice. However, the lack of anti-sway cradles and the rather insubstantial hook and loop fasteners that hold the bikes into the cradles would make this rack unsuitable for frequent use...
    view full answer...
  • Hitch and Cargo Carrier Recommendation that Fits 2009 Saab 9-3
    For a vehicle like your 2009 Saab 9-3 sedan that only has 1-1/4 inch hitches like the # C11326 available you will have to go with a 1-1/4 inch compatible carrier instead of the # C18100 which only fits 2 inch hitches. The Curt part # C18110 would be a great option confirmed to fit.
    view full answer...
  • Does Car have to be Jacked Up to Install a Trailer Hitch on a 2007 Saab 9-3
    You would not have to jack up your 2007 Saab 9-3 to install Curt trailer hitch # C11326. But it will make it a whole lot easier if you did. I have included a link to the installation instructions and a video showing an example install for you. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt...
    view full answer...
  • 2006 Saab 9-3 Aero with Dual Exhaust Trailer Hitch Compatibility
    If your 2006 Saab 9-3 Aero is the Sportcombi with dual exhaust, you will need the Curt Trailer Hitch Receiver - Class I # C11140. If you don't have the Sportcombi model then there is not currently a fit for your dual exhaust model. The # C11326 which is a fit for the sedan and convertible models is not a fit for SportCombi models or models with dual exhaust.
    view full answer...
  • Recommended Trailer Wiring Kits For 2004 Saab 9-3
    I recommend the Wiring Harness, part # C59496. This kit comes with a circuit tester that helps locate the wires on your Saab you need to attach to. The unit prevents feedback to the electrical system on your vehicle. This system works with LED, incandescent, or standard bulb taillights. If you do not have a hitch installed on your Saab I recommend the Curt Trailer Hitch, part # C11326. This is a Class l hitch with a 1-1/4 inch receiver opening. The recommended ball mount with the Curt...
    view full answer...
  • Trailer Hitch for 2003 Saab 9-3 for Carrying Thule T2 XT
    We actually only have a hitch for the 2003 Saab 9-3 between the two vehicles you mentioned with the part # C11326. Hopefully your version of the Thule T2 Pro is the one for the 1-1/4 inch size like part # TH23JV since there isn't a 2 inch hitch that fits your vehicle.
    view full answer...
  • Availability of Trailer Hitch for 2008 Saab 9-3 Convertible
    The fact that your vehicle has the dual exhaust would mean that the one hitch that Curt manufactures for the 9-3 convertible will not be compatible with your vehicle. If you were wanting to carry bikes, you could use a trunk mounted bike rack, like the Hollywood Racks Express, available in a 3 bike model as part # HRE3. If you'll be transporting women's bikes or bikes with sharply-angled top tubes, you might also consider a frame adapter bar like part # 64005. The bar spans the distance...
    view full answer...
  • Recommended Trailer Hitch Receiver, Ball Mount, And Wiring For 2003 Saab 9-3 Sedan
    For your 2003 Saab 9-3, the difference between the hitches is connection points to the frame. There is a compatibility issue for the Draw-Tite hitch on a sedan, so the only confirmed fit for your vehicle is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11326. I think you got confused because it was listed twice because it is a fit for a convertible as well as a sedan. I've linked a couple videos of this installation for you. If you will be doing some light towing...
    view full answer...
  • Class II Trailer Hitch Availability for 2007 Saab 9-3
    We do offer the Curt # C11326 for the 2007 Saab 9-3, including the sedan and convertible. This is a fit unless it has dual-exhaust or a SportCombi model. However, this is a light-duty Class I hitche. We offer no Class II hitches for your vehicle. To a degree the development of hitches for vehicles will be based on the vehicle's capacity, in your case a quoted 3500-lb towing capacity. Certainly, a vehicle with such towing capacity would seem to merit a Class II hitch option. Unfortunately,...
    view full answer...
  • Why Doesn't Curt Hitch # C11140 Fit 2006 Saab 9-3 Sedan
    I'll take a look at the pictures and can forward them to Curt, but I know what Curt is going to say. They will state that you are trying to install a hitch designed for the wagon version of the 2006 Saab 9-3 (the SportCombi) and you have a sedan which calls for the hitch # C11326. Is there a reason you didn't want to go with the # C11326? Our hitch manufacturers will avoid making a new hitch part number at all costs if they can have one hitch fit several vehicles. In your situation they...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.