Recommended Trailer Hitch Receiver, Ball Mount, And Wiring For 2003 Saab 9-3 Sedan

Updated 03/16/2017 | Published 03/15/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(29)

$293.00

1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs

(334)

$34.81

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2273)

$37.50

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1673)

$73.32

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2932)

$2.87

Question:

Im looking for a hitch for my 2003 Saab 9-3 sedan. And would like to know what the difference is between curt #11326 and 113262?? Also is the wiring kit safe to put on this car without any error lights on the info display in the car?? Thanks.

asked by: Andres P

Expert Reply:

For your 2003 Saab 9-3, the difference between the hitches is connection points to the frame. There is a compatibility issue for the Draw-Tite hitch on a sedan, so the only confirmed fit for your vehicle is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11326. I think you got confused because it was listed twice because it is a fit for a convertible as well as a sedan. I've linked a couple videos of this installation for you.

If you will be doing some light towing with this hitch, I recommend the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 confirmed to fit this hitch. You will also need a hitch ball like # A-80 and the pin and clip # F-4.

For your vehicle wiring, I recommend theCurt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This harness is confirmed to fit your vehicle and won't cause any errors or warnings to display in your vehicle. It will draw power directly from the battery to power the converter and will only draw the signal from your factory wiring.