Video Transcript for Kodiak 13" Hub and Rotor Spec Review

Hi everybody, Andy here with etrailer.com, and today we're gonna take a look at this Kodiak Dacromet 13 inch hub and rotor, eight on 6 1/2 inch bolt pattern and 8,000 pound axle capacity. Now, Kodiak's hub and rotor assemblies make it easy to change from drum brakes to disk brakes. And this single piece assembly is gonna make installation a snap, whether you're retrofitting or switching from drum brakes. This is made of machine cast iron with a corrosion-resistant dacromet coating. It's balanced for a smooth ride and furnished with industry standard races. And this cast iron construction ensures a favorable friction coefficient for necessary stopping power.

The machined process minimizes run out and warping, and contaminants can't get into between the rotor and hub. The dacromet plating has a 300 to 400 hour salt spray rating. And let me give you a view from the top here to show you the vented design. This features this vented design that effectively dissipates the heat preventing heat related damage. Now, the 5/8th of an inch wheel studs and this screw in polycarbon oil cap are included.

The inner and outer bearings, the grease seals and the oil seals, are all sold separately. But we do list the numbers of those parts at the bottom of this product page under bearing race and seal information. Again, this rotor is 13 inch in diameter and it has an axle capacity of 8,000 pounds, the bolt pattern is eight on 6 1/2 inch, and this will fit wheel sizes of 16 inches and larger, and this is made in the USA. Well, that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..