Are Studs of Kodiak Disc Brakes # KOD77VR Replaceable
Updated 12/15/2025 | Published 11/20/2024 >
Products Featured in This Question
Question:
Are the lug studs replaceable on these rotors? Could they possibly replaced with 5/8 studs in in future if I were to upgrade to 17.5 hub centric wheels for 5/8 studs? My current wheels wont accept 5/8 so I need 9/16 right now.
asked by: Mike
Expert Reply:
Hey Mike, the wheel studs on the Kodiak Rotors part # KOD77VR are replaceable. It is possible to go to a larger diameter wheel stud but you would need to drill the holes out and have the new studs pressed in. This would void the warranty if you were worried about that.
Or we have replacement hub/rotor # KHR13858D that has the stud size.
Product Page this Question was Asked From
Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8K - Oil - Dexter
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Hub and Rotor
- 9/16 Inch Studs
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Video: Kodiak 13" Hub and Rotor Spec Review
- Shop: Nerf Bars - Running Boards
- Shop: DeeZee Brite-Tread Running Boards - 6" Wide - Aluminum Tread Plate - Cab Length
- Q&A: Replacement Bearings and Seal Recommendation for Kodiak Disc Brake Rotor/Hub on Keystone Montana
- Search Results: kodiak 250 caliper
- Shop: Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 5/8" Bolts - 8,000 lbs
- Shop: Kodiak Disc Brake Caliper - Dacromet - 7,000 lbs to 8,000 lbs
- Shop: Kodiak Disc Brake Caliper - KodaGuard - 3,500 lbs to 6,000 lbs
- Shop: Fusion GloLight Combination Tail Light - Stop, Turn, Tail, Backup - Submersible - Red and Clear Lens
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Search Results: ramp bumper
- Search Results: eq 310
- Search Results: 12407
- Search Results: 02475
- Shop: Gooseneck Hitch
- Q&A: Replacement Oil Seal for 13" Kodiak Disc Brakes
- Video: Feature Review Kodiak Synthetic Bearing Oil for Oil Bath Hubs
- Video: All You Need to Know About the Kodiak Synthetic Bearing Oil for Oil Bath Hubs
- Video: Installation: Kodiak Disc Brake Kit on a 2021 Vanleigh Beacon Fifth Wheel
- Q&A: Can Hub Studs be Changed from 9/16 to 5/8 to Use 17-1/2 Inch Wheels on a Horse Trailer
- Search Results: rotor
- Search Results: alco
- Q&A: Comparing Rotor-Only and Hub/Rotor Disc Brake Conversion Kits
- Q&A: Hardware to Use for Securing Replacement Mounting Bracket for Kodiak Disc Brake Caliper
- Q&A: Will Double Lip Grease Seal or Unitized Oil Seal do Better Job of Retaining Grease in Hubs
- Q&A: Torque Specs for Installing Kodiak Replacement Mounting Bracket for Disc Brake Caliper
- Video: Breaking Down the Mounting Bolts and Hardware for 12-1/4" Single Brake Assembly


Jameson C.
12/15/2025
Hey Mike, how did things go with the Kodiak rotors and the stud size change you were considering? Did you end up going with the replacement hub and rotor that already has the 5/8-inch studs? Your update could make it easier for others planning a similar upgrade.