To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Does not fit cab and chassis truck like described
So far looks good easy enough to install
Nick S.
11/24/2025
It looks great! I am glad the install went easy for you. What are you planning on using the hitch for?
Very heavy duty hitch! Got it for my 2004 F550. Installation was tricky having a service bed on my truck and I did not want to drop the fuel tank to do it. Overall, very solid investment and shipping was fast.
It's just like the add said, perfect fit. It only took 20 minutes to install
Herbert
1/21/2026
Its been a busy year of work, I pull a backhoe with the truck I put the hitch on and its holding up great. The paint still looks good. Ill definitely get another one if I get another truck.
Kate F.
1/21/2026
I received the hitch yesterday and just got it mounted. I couldn't be happier with it, is about as stout and well built hitch as I've ever seen, thank you.
Ned
4/18/2021
Am still glad that I went with the curt, I will be getting the same for the next f-350,450 or 550 that I get
Over all good fit keep in mind on my F-550 I need to low fuel tank not drop just Lowe in place.
great fit on 2011 single wheel cab & chaasis F350. Super heavy duty and well made with a thick powder coat finish. Much more robust than other hitches I have used or seen. I have bought two other "Curt" hitches since this one and have been just as impressed. 5+ stars
My 2019 f450 chassis cab had an end of frame fuel tank that had to be lowered to gain access to tighten the forward hitch bolts. Two of six mounting holes had to be drilled. Marking the hole location was easy as the other four boltz held the hitch in position for marking.
A floor jack is useful in raising and lowering the jack and tank.
Strongly suggest starting project with as little fuel in tank as possible.
Im very happy with the hitch and how well it fits. It is very beefy and i dont expect any issues from it in service.
Ordered this part and was left in silence for 4 days. I called etrailer and was told the part had not shipped yet. I asked if there were a better or similar part. The representative helped me find a better part for comparable price. I was instructed to cancel the original part due to it not shipping yet and they would send out the new one. An hour later I received an email that the cancelled part had shipped, and I could no longer cancel the item, instead when it showed up to me I could send it back for $[XX] shipping that I pay.! day later the wrong part and the right part show up together and the shipping box is demolished and has bent ears at securing points. Parts this size andd weight should not be sent this way, poor planning on etrailer side.
Never recieved my hitch, never recieved a tracking number either, ups says it was delivered and its not at my house...sweet
My new hitch arrived and I was concerned because the box took a beating in shipping. Before I opened the box I called, explained what I received and the representative was great, they gave me their direct extension if I was missing anything. I was shocked when I finished opening the box - I was all bubble wrapped and on the corners it had a layer of cardboard and bubble wrapped again. The nut and bolts along with the instructions were all safe tucked into the tube and covered so they couldn’t fall out It’s good to see a company that cares about their customers experience not just their payment.
Just installed this the other day on a 2001 Ford F-550 cab and chassis. There were factory holes already for the two front bolts so I only had to drill the two in the back. Make sure you have a nice, new drill bit as drilling up from the bottom on the frame can be a bit of a task and a sharp bit will lessen that burden.
The size of this receiver is impressive, looks very sturdy and MADE IN THE USA!
Put this on my Sterling AcTerra
Mounting went well. Air bag made me mount it a little farther back but it ain’t going anywhere. Also didn’t have to move my taillights then.
Well made hitch. I use it to transport farm equipment with an F-350 cab and chassis dually
great service
Very good quality, fast shipping, fit like a glove. I would recommend this to anyone.
Works great so far! I had it over a year and it’s just what I needed
The trailer hitch was everything I expected. It was delivered quickly and all the hardware was included. I installed it on my F550. Nice quality hitch.
Sam S.
12/27/2017
The trailer hitch worked put great and is still performing well. Thank you for the follow up.
Doesn't fit all advertised truck applications! Did not fit 2022 F550 crew cab 4x4 w/Douglass service body. The length from the rear mount bolts to the front are 16in while the available frame holes on the truck were only 12 1/2 in apart.
Lazer S.
12/16/2025
Sorry to hear that, Thomas. This hitch does state drilling is necessary for the install though, so it is not a bolt on application. It would be nice if it was, but alas, there are too many variations with cab and chassis models for that to happen. It looks like this goes for all the hitches offered for your vehicle as well. I do also have to point out that the only preexisting holes in the frame should be on the sides. You should be drilling four new holes (two on each side) for the bolts that go in the bottom of the frame. Is this not how you did it?
All in all the hitch is what it should be, the packaging lacks a lot to be desired. The box came all ripped and had holes all in it, two of the mounting angles were damaged, and a lot of touchup paint will have to be used. The two star rating reflects how it is packaged just in a cardboard box with no protection around the hitch itself.
Fit like a glove. Beast of a hitch. T hanks!
So this hitch you must drill new holes to mount, which I was aware of. Instructions describe that the 2 larger holes on the back must line up with 2 factory installed rivits, they did NOT line up with the rivits. After a phone call to Curt they knew of the issue. There is a certain combo Ford built of these trucks that the rivits were not in the pattern this hitch is made for. I had to drop the fuel tank, cut off 2 of the factory rivits and them clamp the receiver on and drill the new holes. Curt is aware of this issue, but the trucks built were this issue were a low production runs with a different fuel tank size. Receiver is great and seems well built, but kinda a pain to install
Exactly what I needed and fast delivery
Looks good, excellent fit, very happy with this product. Best thing about it? etrailer customer service. Olivia did a terrific job. Found me the right product, took care of all the little details, and shipped the hitch out fast. Lots of companies have forgotten how important good customer service is, apparently etrailer remembers. Thanks Olivia!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
4/9/2026
This hitch is designed to fit 2015 - 2020 Ford F-350 Cab and Chassis 2001 - 2014 Ford F-350, 450, and 550 Cab and Chassis 1999 - 2000 Ford F-350, 450, and 550 Cab and Chassis F-350 models 1999 - 2000 Ford F-350, 450, and 550 Cab and Chassis F-450 and F-550 models 2015 - 2025 Ford F-450 Cab and Chassis 2015 - 2027 Ford F-550 Cab and Chassis 2000 - 2026 Ford F-650 and F-750 F-650 What is the ymm of your truck? I am happy to help.