Trailer Hitch, Wiring, And Ball Mount Needed To Pull A Roadmaster Tow Dolly
Updated 02/03/2026 | Published 06/26/2024
Products Featured in This Question
Question:
Which hitch and ball do I need for a Thor Omni xg32 super c to pull a dolly rm2050-1
asked by: Thomas B
Expert Reply:
Hi Thomas,
The Roadmaster Tow Dolly # RM-2050-1 requires a 2" hitch ball. Your Thor Omni XG32 was likely built on a Ford F-550 chassis so you should be able to use the Curt Trailer Hitch Receiver # C15845, but would need to doublecheck that you have this chassis and confirm the model year, as well as needing to measure 6" down from the frame to see if the receiver tube is going to clear the rear fascia.
For the ball mount I recommend using a reducer # 325-GH-007 to get the opening size down to 2" and then using the etrailer Adjustable 2-Ball Mount # e66PR. This has up to a 6" drop/rise to help you get to the 18" - 20" height that the dolly needs to be level.
You'll also need a 4-pole trailer connector to transfer your light signals to the lights on the dolly. If you don't have one then you can use the Tekonsha # 18252 and splice it into your factory tail light wiring for the signals.
(click to enlarge)
Product Page this Question was Asked From
Roadmaster Tow Dolly with Electric Brakes - 4,250 lbs
- Trailers
- Tow Dolly
- Wheel Decks
- 4250 lbs
- Cars/Trucks/SUVs
- Powder Coated Steel
- Roadmaster
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Do I Need To Use Additional Tow Lights When Towing A Car On A Tow Dolly?
- Q&A: How to Test If Redarc Liberty Brake Controller Is Working
- Q&A: Parts Needed to Add Brake Controller to 2026 Ford Transit T350
- Q&A: Blue Ox Parts Needed to Flat Tow 2025 Chevy Silverado 3500HD
- Q&A: Can a Breakaway System and Brake Controller be Installed at Same Time on 2002 Dodge Grand Caravan
- Q&A: Front TorkLift Tie Downs for a 2024 Ford F350 Short Bed
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Must-Have Flat Towing Components
- Q&A: Recommended Replacement Hubs For A Towblazer Tow Dolly
- Article: Holiday 2025 | Best Gifts for Towers
- Article: Can You Flat Tow a MINI Cooper?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Jerred H.
2/3/2026
Hi Thomas, how did things go getting the hitch and ball setup for your Thor Omni and the Roadmaster tow dolly? Did the receiver and ball mount line up well to keep the dolly level? Your update could make it easier for the next person towing with a similar setup.