2018 Jeep Cherokee Mud Flaps

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

Hi Mike; the best option for your 2025 Silverado 2500 ZR2 is definitely the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2709 you looked at. These are going to be the most reliable and durable air bags out there. With a max psi of…

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

Hey Bill, yes the Blue Ox Adjustable Mud Flap System part #BLU49UR can fit on the shank of a Blue Ox weight distribution system as long as for sure your hitch is the 2 inch hitch size. The part #BLU69UR that you referenced is the 2-1/2 inch hitch…

Hey Carl! The WeatherTech Mud Flaps #WT55XQ are confirmed to fit your 2025 Ford Expedition. I am not aware of a location in Canada where you can buy these but it is certainly possible. We do ship to Canada so you can order them from us here at…

Hey Nic, thanks for reaching out! Yes, the Firestone Air Command Heavy Duty Air Compressor #F56VV is designed to maintain the PSI level that you choose. Do you already have an air bag kit installed on your truck?

Hello Michael, Congrats on the new truck! What is your favorite new feature? Yes, the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional #RED87CR comes with the vehicle specific pigtail making it a…

Hey Gary, yes, we do have a base plate for your 2025 Ford Ranger! What you'll want is the Roadmaster Direct-Connect Base Plate Kit #RM23DQ. This base plate has removable arms, has hidden brackets for a non-obtrusive design, and has a simple…

Hey Jason, since you have a Dexter 7,000 lb axle the correct bearing kit you would need is the part #BK3-210 which comes with the correct bearings and grease seal for a 7k hub. For grease I would recommend the LMX Red grease like part #L11390 for a…

Hello Michael, thanks for reaching out. The Gen-Y Torsion 2-Ball Mount #325-GH-1225 weighs 84 lbs altogether including the ball mount, ball attachment and pintle lock.

Yes, both the 2 inch hub, #ERT034, and the 2-1/2 inch hub, #ERT057, attach to the same side arms, #ERT039 and #ERT040, and use the same clamp bolts, #ERT052. So the 2 inch hub will work with the same parts currently on your 2-1/2 inch system!